ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
FQPF11N50CF
자세히보기 데이터시트

FQPF11N50CF

Product Overview

The FQPF11N50CF belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. This MOSFET is known for its high voltage and current handling capabilities, making it suitable for various applications. The FQPF11N50CF is characterized by its low on-state resistance, fast switching speed, and high reliability. It is typically available in a TO-220 package and is sold individually or in bulk quantities.

Specifications

  • Voltage Rating: 500V
  • Current Rating: 11A
  • Package Type: TO-220
  • On-State Resistance: 0.52Ω
  • Switching Speed: <100ns
  • Operating Temperature: -55°C to 150°C
  • Quantity: Individually or Bulk

Pin Configuration

The FQPF11N50CF follows the standard pin configuration for a TO-220 package: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High Voltage Capability
  • Low On-State Resistance
  • Fast Switching Speed
  • High Reliability

Advantages

  • Suitable for high-power applications
  • Low conduction losses
  • Fast switching performance

Disadvantages

  • Higher gate drive requirements compared to some lower voltage MOSFETs
  • May require additional heat sinking for high-power applications

Working Principles

The FQPF11N50CF operates based on the principles of field-effect transistors. When a sufficient voltage is applied to the gate terminal, it creates an electric field that allows current to flow between the drain and source terminals. By controlling the gate voltage, the MOSFET can effectively switch on and off, enabling it to regulate the flow of current in a circuit.

Application Field Plans

The FQPF11N50CF is commonly used in the following applications: - Switching power supplies - Motor control - Inverters - Audio amplifiers - LED lighting

Alternative Models

  • IRF840
  • STP11NM60N
  • FQP11N60C

In conclusion, the FQPF11N50CF power MOSFET offers high voltage and current capabilities, making it suitable for various electronic applications. Its low on-state resistance and fast switching speed contribute to its efficiency and reliability in high-power circuits.

[Word Count: 330]

기술 솔루션에 FQPF11N50CF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of FQPF11N50CF:

  1. What is the maximum drain-source voltage for FQPF11N50CF?

    • The maximum drain-source voltage for FQPF11N50CF is 500V.

  2. What is the continuous drain current rating for FQPF11N50CF?

    • The continuous drain current rating for FQPF11N50CF is 11A.

  3. What type of package does FQPF11N50CF come in?

    • FQPF11N50CF comes in a TO-220F package.

  4. What are the typical applications for FQPF11N50CF?

    • FQPF11N50CF is commonly used in power supply, lighting, and motor control applications.

  5. What is the on-resistance of FQPF11N50CF?

    • The on-resistance of FQPF11N50CF is typically around 0.65 ohms.

  6. Is FQPF11N50CF suitable for high-frequency switching applications?

    • Yes, FQPF11N50CF is suitable for high-frequency switching due to its low on-resistance.

  7. What is the gate-source threshold voltage for FQPF11N50CF?

    • The gate-source threshold voltage for FQPF11N50CF is typically around 2.5V.

  8. Can FQPF11N50CF be used in automotive applications?

    • Yes, FQPF11N50CF can be used in automotive applications such as motor control and power distribution.

  9. Does FQPF11N50CF require a heat sink for operation?

    • It is recommended to use a heat sink for FQPF11N50CF when operating at high currents or in high-temperature environments.

  10. What are the key advantages of using FQPF11N50CF in technical solutions?

    • The key advantages of using FQPF11N50CF include its high voltage rating, low on-resistance, and suitability for various power control applications.