ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
LM2576TV-ADJG
자세히보기 데이터시트

LM2576TV-ADJG

Product Overview

Category

The LM2576TV-ADJG belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Adjustable output voltage
  • High efficiency
  • Wide input voltage range
  • Thermal shutdown protection
  • Short circuit protection

Package

The LM2576TV-ADJG comes in a TO-220 package.

Essence

This voltage regulator is designed to provide a stable and adjustable output voltage for various electronic applications.

Packaging/Quantity

The LM2576TV-ADJG is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.23V to 37V
  • Output Current: Up to 3A
  • Switching Frequency: 52 kHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The LM2576TV-ADJG has the following pin configuration:

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. Feedback (Adjustable Voltage Reference)
  5. ON/OFF (Enable/Disable Control)

Functional Features

  • Adjustable output voltage through the feedback pin
  • Efficient voltage regulation with minimal power dissipation
  • Protection against thermal overload and short circuits
  • Low standby current consumption in shutdown mode
  • Fast transient response for sudden load changes

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications
  • High efficiency results in reduced power loss
  • Compact TO-220 package facilitates easy integration into circuits
  • Thermal shutdown and short circuit protection enhance reliability

Disadvantages

  • Limited maximum output current of 3A may not be suitable for high-power applications
  • Switching frequency of 52 kHz may introduce audible noise in sensitive audio circuits

Working Principles

The LM2576TV-ADJG operates as a step-down switching voltage regulator. It uses a pulse width modulation (PWM) control scheme to regulate the output voltage. The feedback pin is used to adjust the output voltage by varying the duty cycle of the internal switch. This allows for precise voltage regulation within the specified range.

Detailed Application Field Plans

The LM2576TV-ADJG finds application in various fields, including:

  1. Power supply units for electronic devices
  2. Battery charging circuits
  3. Automotive electronics
  4. Industrial automation systems
  5. LED lighting applications

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: Similar to LM2576TV-ADJG but with a lower input voltage range.
  2. LM317T: Adjustable linear voltage regulator with higher output current capability.
  3. LT1084CP-ADJ: High-current adjustable linear voltage regulator with low dropout voltage.

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 311

기술 솔루션에 LM2576TV-ADJG 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of LM2576TV-ADJG in technical solutions:

  1. Q: What is LM2576TV-ADJG? A: LM2576TV-ADJG is a voltage regulator IC that can step down an input voltage to a lower, adjustable output voltage.

  2. Q: What is the maximum input voltage for LM2576TV-ADJG? A: The maximum input voltage for LM2576TV-ADJG is typically 40V.

  3. Q: How much output current can LM2576TV-ADJG handle? A: LM2576TV-ADJG can handle a maximum output current of 3A.

  4. Q: Can LM2576TV-ADJG be used to generate a fixed output voltage? A: Yes, LM2576TV-ADJG can be configured to generate a fixed output voltage by setting the feedback resistors accordingly.

  5. Q: How do I adjust the output voltage of LM2576TV-ADJG? A: The output voltage of LM2576TV-ADJG can be adjusted by changing the value of the feedback resistors.

  6. Q: Is LM2576TV-ADJG suitable for battery-powered applications? A: Yes, LM2576TV-ADJG is suitable for battery-powered applications as it has low quiescent current and high efficiency.

  7. Q: Can LM2576TV-ADJG handle both step-down and step-up voltage conversion? A: No, LM2576TV-ADJG is specifically designed for step-down voltage conversion only.

  8. Q: Does LM2576TV-ADJG require any external components for operation? A: Yes, LM2576TV-ADJG requires external input and output capacitors, as well as an inductor for proper operation.

  9. Q: What is the typical efficiency of LM2576TV-ADJG? A: The typical efficiency of LM2576TV-ADJG is around 80-90%, depending on the input and output voltage levels.

  10. Q: Can LM2576TV-ADJG handle high-frequency switching? A: Yes, LM2576TV-ADJG can handle high-frequency switching up to a few hundred kilohertz, making it suitable for many applications.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.