이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MMBZ5261ELT1

MMBZ5261ELT1

Introduction

The MMBZ5261ELT1 is a zener diode that belongs to the category of semiconductor devices. It is commonly used for voltage regulation and protection in electronic circuits. This entry provides an overview of the MMBZ5261ELT1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Devices
  • Use: Voltage Regulation and Protection
  • Characteristics: Zener Diode, Low Leakage Current, High Stability
  • Package: SOT-23
  • Essence: Voltage Regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage - Zener (Nom): 3.6V
  • Power Dissipation (Max): 200mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The MMBZ5261ELT1 has three pins: 1. Anode 2. Cathode 3. No Connection (NC)

Functional Features

  • Precise Voltage Regulation
  • Low Reverse Leakage Current
  • High Stability over a Wide Range of Operating Conditions

Advantages and Disadvantages

Advantages

  • Reliable Voltage Regulation
  • Small Package Size
  • Low Cost

Disadvantages

  • Limited Power Dissipation
  • Sensitivity to Overvoltage Conditions

Working Principles

The MMBZ5261ELT1 operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased.

Detailed Application Field Plans

The MMBZ5261ELT1 is widely used in various applications, including: - Voltage Regulation in Power Supplies - Overvoltage Protection in Electronic Circuits - Signal Clipping and Limiting

Detailed and Complete Alternative Models

Some alternative models to the MMBZ5261ELT1 include: - MMBZ5259ELT1 - MMBZ5260ELT1 - MMBZ5262ELT1

In conclusion, the MMBZ5261ELT1 zener diode is a reliable semiconductor device used for voltage regulation and protection in electronic circuits. Its precise voltage regulation, small package size, and low cost make it suitable for a wide range of applications.

(Word count: 320)

기술 솔루션에 MMBZ5261ELT1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MMBZ5261ELT1?

    • MMBZ5261ELT1 is a Zener diode designed for voltage regulation and protection in various electronic circuits.
  2. What is the voltage rating of MMBZ5261ELT1?

    • The voltage rating of MMBZ5261ELT1 is 39V.
  3. What are the typical applications of MMBZ5261ELT1?

    • MMBZ5261ELT1 is commonly used for voltage clamping, voltage regulation, and transient voltage suppression in electronic circuits.
  4. What is the power dissipation of MMBZ5261ELT1?

    • The power dissipation of MMBZ5261ELT1 is 200mW.
  5. What is the maximum forward voltage of MMBZ5261ELT1?

    • The maximum forward voltage of MMBZ5261ELT1 is 1.5V at 10mA.
  6. What is the reverse leakage current of MMBZ5261ELT1?

    • The reverse leakage current of MMBZ5261ELT1 is typically 100nA at its working voltage.
  7. Can MMBZ5261ELT1 be used for overvoltage protection?

    • Yes, MMBZ5261ELT1 can be used for overvoltage protection by clamping the voltage to its breakdown voltage.
  8. Is MMBZ5261ELT1 suitable for low-power applications?

    • Yes, MMBZ5261ELT1 is suitable for low-power applications due to its low power dissipation.
  9. What is the temperature range for MMBZ5261ELT1?

    • The operating temperature range for MMBZ5261ELT1 is -65°C to +150°C.
  10. Are there any alternative components to MMBZ5261ELT1 with similar specifications?

    • Yes, other Zener diodes with comparable voltage ratings and characteristics include BZX84C39 and BZT52C39 series.