MMFZ6V8T3G

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy, compact size
Package: SOT-23
Essence: Regulating voltage for electronic circuits
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 6.5V
Output Voltage: 1.2V to 5.5V
Maximum Output Current: 150mA
Dropout Voltage: 160mV at 100mA
Line Regulation: 0.05% typical
Load Regulation: 0.1% typical
Quiescent Current: 75µA typical

Detailed Pin Configuration

Pin 1 (GND): Ground connection
Pin 2 (VOUT): Regulated output voltage
Pin 3 (VIN): Input voltage

Functional Features

Low dropout voltage
Thermal shutdown protection
Short-circuit current limit
Reverse battery protection

Advantages and Disadvantages

Advantages

Small package size
Low dropout voltage
Wide input voltage range

Disadvantages

Limited maximum output current
Higher quiescent current compared to some alternatives

Working Principles

The MMFZ6V8T3G is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback mechanism to adjust its internal circuitry, ensuring a consistent output.

Detailed Application Field Plans

The MMFZ6V8T3G is suitable for various applications requiring a stable voltage supply, such as: - Battery-powered devices - Portable electronics - Sensor modules - IoT devices

Detailed and Complete Alternative Models

LM1117MPX-3.3/NOPB: Similar low dropout voltage regulator
XC6206P332MR-G: Compact SOT-23 packaged voltage regulator
TS2940CZ33: Low dropout regulator with higher maximum output current

In conclusion, the MMFZ6V8T3G is a compact and efficient voltage regulator suitable for low-power electronic applications. Its low dropout voltage and thermal protection make it an ideal choice for portable and battery-powered devices.

[Word Count: 306]

기술 솔루션에 MMFZ6V8T3G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is MMFZ6V8T3G?
- MMFZ6V8T3G is a Zener diode with a voltage of 6.8V and a power rating of 500mW.
How is MMFZ6V8T3G used in technical solutions?
- MMFZ6V8T3G is commonly used for voltage regulation, overvoltage protection, and signal clamping in various electronic circuits.
What are the typical applications of MMFZ6V8T3G?
- MMFZ6V8T3G is often used in power supplies, voltage regulators, and as a protective element in sensitive electronic components.
What are the key electrical characteristics of MMFZ6V8T3G?
- The key electrical characteristics include a Zener voltage of 6.8V, a maximum reverse leakage current of 5µA, and a maximum dynamic resistance of 40Ω.
How does MMFZ6V8T3G provide overvoltage protection?
- MMFZ6V8T3G conducts current when the voltage across it exceeds 6.8V, effectively shunting excess voltage to protect downstream components.
Can MMFZ6V8T3G be used in automotive applications?
- Yes, MMFZ6V8T3G can be used in automotive electronics for voltage regulation and protection against voltage spikes.
What are the temperature considerations for MMFZ6V8T3G?
- MMFZ6V8T3G has an operating temperature range of -65°C to +150°C, making it suitable for a wide range of environments.
Are there any limitations to using MMFZ6V8T3G in high-power applications?
- Yes, MMFZ6V8T3G has a maximum power dissipation of 500mW, so it may not be suitable for high-power applications without additional heat sinking.
What are the packaging options available for MMFZ6V8T3G?
- MMFZ6V8T3G is available in a variety of surface mount packages, including SOD-123 and SOD-323.
Where can I find detailed specifications and application notes for MMFZ6V8T3G?
- Detailed specifications and application notes for MMFZ6V8T3G can be found on the manufacturer's datasheet and website.