ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MMSZ5268BT1
자세히보기 데이터시트

MMSZ5268BT1

Introduction

The MMSZ5268BT1 is a zener diode that belongs to the category of semiconductor devices. This component is widely used in electronic circuits for voltage regulation and protection against voltage spikes. In this entry, we will provide an overview of the MMSZ5268BT1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Voltage regulation and protection against voltage spikes
  • Characteristics: Zener diode with specific breakdown voltage characteristics
  • Package: SOD-123 package
  • Essence: Provides stable voltage reference
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Voltage Range: 3.3V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +150°C
  • Zener Impedance: 20Ω
  • Maximum Reverse Leakage Current: 5μA

Detailed Pin Configuration

The MMSZ5268BT1 zener diode has a standard SOD-123 package with two pins. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Stable Voltage Reference: The MMSZ5268BT1 provides a stable voltage output when operated within its specified parameters.
  • Voltage Regulation: It effectively regulates voltage by maintaining a constant output voltage across its terminals.
  • Overvoltage Protection: Acts as a protective device by diverting excessive voltage away from sensitive components in a circuit.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact SOD-123 package
  • Low reverse leakage current

Disadvantages

  • Limited power dissipation capability
  • Narrow voltage range

Working Principles

The MMSZ5268BT1 operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse biased. This allows it to regulate voltage and protect connected components from overvoltage conditions.

Detailed Application Field Plans

The MMSZ5268BT1 finds extensive use in various electronic applications, including: - Voltage regulators in power supplies - Overvoltage protection in communication equipment - Signal conditioning circuits - Voltage reference sources in instrumentation

Detailed and Complete Alternative Models

Some alternative models to the MMSZ5268BT1 include: - BZX84C3V3: Similar SOD-123 packaged zener diode with a 3.3V breakdown voltage - MMBZ5230B: Slightly lower voltage (3.0V) zener diode in SOD-123 package - 1N4729A: Axial lead zener diode with 3.3V breakdown voltage

In conclusion, the MMSZ5268BT1 zener diode serves as a crucial component in electronic circuits, providing stable voltage regulation and overvoltage protection. Its compact size and precise voltage characteristics make it suitable for a wide range of applications.

[Word count: 443]

기술 솔루션에 MMSZ5268BT1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the MMSZ5268BT1?

    • The MMSZ5268BT1 is a Zener diode designed for voltage regulation and protection in electronic circuits.

  2. What is the maximum power dissipation of MMSZ5268BT1?

    • The maximum power dissipation of MMSZ5268BT1 is 500mW.

  3. What is the voltage rating of MMSZ5268BT1?

    • The voltage rating of MMSZ5268BT1 is 3.3V.

  4. What are the typical applications of MMSZ5268BT1?

    • Typical applications of MMSZ5268BT1 include voltage regulation, overvoltage protection, and signal clamping in various electronic circuits.

  5. What is the operating temperature range of MMSZ5268BT1?

    • The operating temperature range of MMSZ5268BT1 is -65°C to +150°C.

  6. What is the package type of MMSZ5268BT1?

    • MMSZ5268BT1 comes in a SOD-123 surface mount package.

  7. What is the reverse standoff voltage of MMSZ5268BT1?

    • The reverse standoff voltage of MMSZ5268BT1 is 3.3V.

  8. Can MMSZ5268BT1 be used for ESD protection?

    • Yes, MMSZ5268BT1 can be used for Electrostatic Discharge (ESD) protection in electronic circuits.

  9. Is MMSZ5268BT1 RoHS compliant?

    • Yes, MMSZ5268BT1 is RoHS compliant, making it suitable for environmentally friendly designs.

  10. What are the key specifications to consider when using MMSZ5268BT1 in a technical solution?

    • Key specifications to consider include voltage rating, power dissipation, package type, and operating temperature range. Additionally, understanding its application in voltage regulation and protection circuits is crucial for effective utilization.