이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
NM24C04N

NM24C04N

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile memory storage
  • Characteristics: Low power consumption, high reliability, small package size
  • Package: DIP-8, SOIC-8
  • Essence: EEPROM (Electrically Erasable Programmable Read-Only Memory)
  • Packaging/Quantity: Tape and reel, 2500 pieces per reel

Specifications

  • Memory Size: 4 Kilobits (512 x 8 bits)
  • Supply Voltage: 1.8V to 5.5V
  • Operating Temperature: -40°C to +85°C
  • Write Cycle Endurance: 1 Million cycles
  • Data Retention: 100 Years

Detailed Pin Configuration

The NM24C04N IC has a total of 8 pins arranged as follows:

  1. A0: Address Input
  2. A1: Address Input
  3. A2: Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Supply Voltage

Functional Features

  • Byte-wise random access for read and write operations
  • Self-timed write cycle with auto-clear on completion
  • Hardware write protection using the WP pin
  • Software write protection by setting specific bits in the memory
  • Sequential read operation for faster data retrieval

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered devices - High reliability ensures data integrity over long periods - Small package size allows for space-efficient designs

Disadvantages: - Limited memory size may not be sufficient for certain applications - Slower write speed compared to other memory technologies

Working Principles

The NM24C04N is an EEPROM that stores data using electrically isolated floating-gate transistors. It utilizes a combination of electrical signals and voltage levels to perform read and write operations. The memory cells can be individually addressed, allowing for random access to specific data bytes.

Detailed Application Field Plans

The NM24C04N is commonly used in various electronic devices and systems, including but not limited to:

  1. Consumer electronics (e.g., TVs, set-top boxes, DVD players)
  2. Automotive applications (e.g., car audio systems, dashboard displays)
  3. Industrial control systems (e.g., programmable logic controllers, sensors)
  4. Medical equipment (e.g., patient monitoring devices, diagnostic instruments)
  5. Smart meters and energy management systems

Detailed and Complete Alternative Models

  • AT24C04: Similar 4 Kilobit EEPROM IC from Atmel
  • CAT24C04: 4 Kilobit EEPROM IC from ON Semiconductor
  • M24C04: 4 Kilobit EEPROM IC from STMicroelectronics
  • 24AA04: 4 Kilobit EEPROM IC from Microchip Technology

These alternative models offer similar functionality and can be used as replacements for the NM24C04N in various applications.

Word count: 314 words

기술 솔루션에 NM24C04N 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of NM24C04N in technical solutions:

  1. Q: What is NM24C04N? A: NM24C04N is a 4K-bit serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.

  2. Q: What is the operating voltage range for NM24C04N? A: The operating voltage range for NM24C04N is typically between 2.5V and 5.5V.

  3. Q: How much data can NM24C04N store? A: NM24C04N can store up to 512 bytes or 4 kilobits of data.

  4. Q: What is the communication interface used by NM24C04N? A: NM24C04N uses the I2C (Inter-Integrated Circuit) communication interface.

  5. Q: Can NM24C04N be used for storing program code? A: Yes, NM24C04N can be used to store small program codes or configuration data.

  6. Q: What is the typical write endurance of NM24C04N? A: NM24C04N has a typical write endurance of 1 million cycles.

  7. Q: Does NM24C04N support hardware write protection? A: Yes, NM24C04N supports hardware write protection using a dedicated pin.

  8. Q: Is NM24C04N suitable for automotive applications? A: Yes, NM24C04N is designed to meet the requirements of automotive applications.

  9. Q: Can NM24C04N operate at high temperatures? A: Yes, NM24C04N is specified to operate at temperatures up to 125°C.

  10. Q: Are there any specific precautions to consider when using NM24C04N? A: It is important to follow the recommended operating conditions and handling guidelines provided in the datasheet to ensure proper functionality and reliability of NM24C04N.

Please note that these answers are general and may vary depending on the specific application and requirements.