ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SZBZX84C3V9ET3G

SZBZX84C3V9ET3G Encyclopedia Entry

Product Overview

Category

The SZBZX84C3V9ET3G belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits, ensuring a stable output voltage despite fluctuations in input voltage or load.

Characteristics

  • Low dropout voltage
  • High accuracy
  • Low quiescent current
  • Thermal shutdown protection

Package

The SZBZX84C3V9ET3G is available in a small surface-mount package, making it suitable for compact electronic designs.

Essence

The essence of this product lies in its ability to provide a consistent and reliable voltage output in various electronic applications.

Packaging/Quantity

The SZBZX84C3V9ET3G is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The SZBZX84C3V9ET3G has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown

Advantages

  • Small form factor
  • Low dropout voltage
  • Wide operating temperature range

Disadvantages

  • Limited maximum output current
  • Sensitive to input voltage fluctuations

Working Principles

The SZBZX84C3V9ET3G utilizes a feedback mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is commonly used in: - Battery-powered devices - Sensor modules - Portable electronics

Detailed and Complete Alternative Models

  • LM1117
  • MCP1700
  • AP2112

In conclusion, the SZBZX84C3V9ET3G is a versatile voltage regulator with a compact design and reliable performance, making it suitable for a wide range of electronic applications.

[Word Count: 298]

기술 솔루션에 SZBZX84C3V9ET3G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the SZBZX84C3V9ET3G used for?

    • The SZBZX84C3V9ET3G is a voltage regulator diode commonly used to regulate voltage in electronic circuits.

  2. What is the maximum input voltage for SZBZX84C3V9ET3G?

    • The maximum input voltage for SZBZX84C3V9ET3G is typically around 30V.

  3. What is the output voltage of SZBZX84C3V9ET3G?

    • The output voltage of SZBZX84C3V9ET3G is 3.9V, making it suitable for various low voltage applications.

  4. What is the power dissipation of SZBZX84C3V9ET3G?

    • The power dissipation of SZBZX84C3V9ET3G is typically around 225mW.

  5. What are the typical applications of SZBZX84C3V9ET3G?

    • SZBZX84C3V9ET3G is commonly used in battery-powered systems, portable devices, and other low voltage applications where a stable voltage supply is required.

  6. What is the package type of SZBZX84C3V9ET3G?

    • SZBZX84C3V9ET3G comes in a SOT-23 surface mount package, which is compact and suitable for small form factor designs.

  7. Is SZBZX84C3V9ET3G suitable for automotive applications?

    • Yes, SZBZX84C3V9ET3G is often used in automotive electronics due to its low voltage regulation capabilities.

  8. What is the temperature range for SZBZX84C3V9ET3G?

    • The SZBZX84C3V9ET3G typically operates within a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.

  9. Can SZBZX84C3V9ET3G be used in conjunction with other voltage regulators?

    • Yes, SZBZX84C3V9ET3G can be used alongside other voltage regulators to achieve specific voltage requirements in a circuit.

  10. Are there any common failure modes associated with SZBZX84C3V9ET3G?

    • Common failure modes for SZBZX84C3V9ET3G include overvoltage, overcurrent, and thermal stress, so proper design considerations should be taken into account to prevent these issues.