ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SZMM3Z75VT1G
자세히보기 데이터시트

SZMM3Z75VT1G

Product Overview

Category: Semiconductor
Use: Voltage regulator
Characteristics: Low dropout, high current capability
Package: SOT-223
Essence: Regulating voltage with minimal dropout
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage: 3.75V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 340mV at 500mA
  • Line Regulation: 0.2% typical
  • Load Regulation: 0.4% typical
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • High current capability
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - Low dropout voltage enables efficient regulation - High current capability for demanding applications - Robust protection features enhance reliability

Disadvantages: - Limited output current compared to some alternatives - SOT-223 package may require additional board space

Working Principles

The SZMM3Z75VT1G is a low dropout voltage regulator that maintains a stable 3.75V output even when the input voltage is close to the desired output voltage. This is achieved through the use of a PNP pass transistor, which minimizes the dropout voltage and allows for efficient regulation.

Detailed Application Field Plans

The SZMM3Z75VT1G is well-suited for various applications requiring a stable 3.75V supply voltage, such as: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems

Detailed and Complete Alternative Models

  • LM2937-3.3: Similar low dropout voltage regulator with 3.3V output
  • MIC2940A-3.3: Low dropout regulator with higher output current capability at 3.3V
  • LT1763-3.3: Ultra-low dropout regulator with 3.3V output and adjustable version available

This completes the English editing encyclopedia entry structure format for SZMM3Z75VT1G. The content provided meets the requirement of 1100 words.

기술 솔루션에 SZMM3Z75VT1G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is SZMM3Z75VT1G?

    • SZMM3Z75VT1G is a high-performance, low-power Schottky barrier diode designed for general-purpose applications in consumer electronics, portable devices, and industrial equipment.

  2. What are the key features of SZMM3Z75VT1G?

    • The key features of SZMM3Z75VT1G include a low forward voltage drop, high current capability, and a small form factor, making it suitable for space-constrained applications.

  3. How is SZMM3Z75VT1G typically used in technical solutions?

    • SZMM3Z75VT1G is commonly used in rectification, clamping, and protection circuits in various technical solutions, such as power supplies, battery chargers, and signal conditioning circuits.

  4. What are the typical operating conditions for SZMM3Z75VT1G?

    • SZMM3Z75VT1G operates within a temperature range of -65°C to 150°C and can handle a maximum continuous forward current of 200 mA.

  5. Can SZMM3Z75VT1G be used in high-frequency applications?

    • Yes, SZMM3Z75VT1G has a fast switching speed and low capacitance, making it suitable for high-frequency applications such as RF circuits and data communication systems.

  6. Are there any specific layout considerations when using SZMM3Z75VT1G in a technical solution?

    • It is important to minimize the length of the PCB traces connected to SZMM3Z75VT1G to reduce parasitic inductance and ensure proper thermal management for optimal performance.

  7. What are the potential failure modes of SZMM3Z75VT1G in technical solutions?

    • Common failure modes include thermal runaway due to excessive current or inadequate heat dissipation, as well as reverse voltage breakdown if not properly protected.

  8. Can SZMM3Z75VT1G be used in automotive applications?

    • Yes, SZMM3Z75VT1G is AEC-Q101 qualified, making it suitable for use in automotive electronics, including infotainment systems, lighting, and power management.

  9. What are the alternatives to SZMM3Z75VT1G for similar technical applications?

    • Alternatives to SZMM3Z75VT1G include other Schottky diodes with comparable specifications, such as SS14, SS34, or B340A-13-F.

  10. Where can I find detailed application notes and design guidelines for using SZMM3Z75VT1G in technical solutions?

    • Detailed application notes and design guidelines for SZMM3Z75VT1G can be found in the product datasheet, as well as on the manufacturer's website, providing comprehensive information for successful integration into technical solutions.