Rohm Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BA08CC0FP-E2
자세히보기 데이터시트

BA08CC0FP-E2

Product Overview

Category

BA08CC0FP-E2 belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in electronic devices.

Characteristics

  • Regulates voltage to ensure stable power supply
  • Compact size for easy integration into circuit boards
  • Low power consumption
  • Wide input voltage range
  • High output current capability

Package

BA08CC0FP-E2 is available in a small outline package (SOP) format.

Essence

The essence of BA08CC0FP-E2 lies in its ability to provide reliable and regulated voltage to various electronic components.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V - 18V
  • Output Voltage: 3.3V
  • Output Current: Up to 1A
  • Dropout Voltage: 0.5V (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

BA08CC0FP-E2 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low quiescent current

Advantages

  • Stable and regulated output voltage
  • Wide input voltage range allows compatibility with various power sources
  • Compact size enables easy integration into space-constrained designs
  • Efficient power conversion with low power dissipation
  • Built-in protection features enhance reliability and prevent damage to connected components

Disadvantages

  • Limited output current compared to higher-rated voltage regulators
  • Dropout voltage may cause slight power loss in low input voltage scenarios

Working Principles

BA08CC0FP-E2 operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in input voltage or load conditions.

Detailed Application Field Plans

BA08CC0FP-E2 finds applications in various electronic devices, including but not limited to:

  1. Mobile phones
  2. Tablets
  3. Portable audio players
  4. Digital cameras
  5. Wireless communication devices

Detailed and Complete Alternative Models

  • BA05CC0FP-E2: Similar voltage regulator with lower output current capability (500mA)
  • BA12CC0FP-E2: Similar voltage regulator with higher output current capability (1.5A)
  • BA33CC0FP-E2: Similar voltage regulator with adjustable output voltage

Note: The above alternative models are from the same product series and share similar characteristics and pin configurations.

This entry provides an overview of BA08CC0FP-E2, a voltage regulator integrated circuit. It includes information about its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

기술 솔루션에 BA08CC0FP-E2 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of BA08CC0FP-E2 in technical solutions:

  1. Q: What is BA08CC0FP-E2? A: BA08CC0FP-E2 is a specific model of voltage regulator IC (integrated circuit) used for regulating voltage in electronic circuits.

  2. Q: What is the input voltage range of BA08CC0FP-E2? A: The input voltage range of BA08CC0FP-E2 is typically between 7V and 35V.

  3. Q: What is the output voltage range of BA08CC0FP-E2? A: The output voltage range of BA08CC0FP-E2 is typically between 2V and 15V.

  4. Q: What is the maximum output current of BA08CC0FP-E2? A: The maximum output current of BA08CC0FP-E2 is typically around 1A.

  5. Q: What are the typical applications of BA08CC0FP-E2? A: BA08CC0FP-E2 is commonly used in various technical solutions, such as power supplies, battery chargers, and automotive electronics.

  6. Q: Does BA08CC0FP-E2 require any external components for operation? A: Yes, BA08CC0FP-E2 requires external capacitors for stability and proper operation. The datasheet provides guidelines for selecting the appropriate capacitors.

  7. Q: Is BA08CC0FP-E2 suitable for both fixed and adjustable output voltage applications? A: Yes, BA08CC0FP-E2 can be used for both fixed and adjustable output voltage applications, depending on the configuration and external components used.

  8. Q: What is the thermal resistance of BA08CC0FP-E2? A: The thermal resistance of BA08CC0FP-E2 is typically around 50°C/W, which indicates its ability to dissipate heat.

  9. Q: Can BA08CC0FP-E2 handle overcurrent or short-circuit conditions? A: Yes, BA08CC0FP-E2 has built-in protection features like current limiting and thermal shutdown to protect against overcurrent and short-circuit conditions.

  10. Q: Where can I find more detailed information about the application and usage of BA08CC0FP-E2? A: You can refer to the datasheet provided by the manufacturer, which contains comprehensive information about the application, electrical characteristics, and recommended usage of BA08CC0FP-E2.

Please note that the specific details may vary depending on the manufacturer and version of the BA08CC0FP-E2 IC. It's always recommended to consult the datasheet for accurate and up-to-date information.