Rohm Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BA178M12T
자세히보기 데이터시트

BA178M12T

Product Overview

Category

The BA178M12T belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the output voltage in electronic circuits.

Characteristics

  • Input Voltage: 35V
  • Output Voltage: 12V
  • Maximum Output Current: 1A
  • Low Dropout Voltage
  • Thermal Overload Protection

Package

The BA178M12T comes in a TO-220 package.

Essence

This voltage regulator is essential for maintaining a stable voltage supply in various electronic applications.

Packaging/Quantity

The BA178M12T is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 14V to 35V
  • Output Voltage: 12V ±4%
  • Quiescent Current: 5mA
  • Line Regulation: 0.2%
  • Load Regulation: 0.4%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The BA178M12T has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage Regulation
  • Thermal Shutdown
  • Short Circuit Protection
  • Internal Current Limiting

Advantages and Disadvantages

Advantages

  • Stable Output Voltage
  • Wide Input Voltage Range
  • Overload Protection

Disadvantages

  • Heat Dissipation Required for High Current Applications
  • Higher Dropout Voltage Compared to Some Modern Regulators

Working Principles

The BA178M12T operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage.

Detailed Application Field Plans

The BA178M12T is commonly used in: - Power Supplies - Automotive Electronics - Industrial Control Systems - Audio Amplifiers

Detailed and Complete Alternative Models

Some alternative models to the BA178M12T include: - LM7812 - UA7812 - L7912CV

In conclusion, the BA178M12T is a reliable voltage regulator with a wide range of applications, providing stable voltage output and essential protection features.

[Word Count: 298]

기술 솔루션에 BA178M12T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the input voltage range for BA178M12T?

    • The input voltage range for BA178M12T is typically 14V to 35V.

  2. What is the output voltage of BA178M12T?

    • The output voltage of BA178M12T is 12V.

  3. What is the maximum output current of BA178M12T?

    • The maximum output current of BA178M12T is 1.5A.

  4. What is the typical dropout voltage of BA178M12T?

    • The typical dropout voltage of BA178M12T is 2V at 1A.

  5. What is the operating temperature range for BA178M12T?

    • The operating temperature range for BA178M12T is typically -40°C to 125°C.

  6. Is BA178M12T a linear regulator or a switching regulator?

    • BA178M12T is a linear regulator.

  7. Does BA178M12T require an external heat sink?

    • Yes, BA178M12T may require an external heat sink depending on the application and power dissipation.

  8. What are the typical applications of BA178M12T?

    • Typical applications of BA178M12T include powering microcontrollers, sensors, and other low-power electronic devices.

  9. What are the key features of BA178M12T?

    • The key features of BA178M12T include overcurrent protection, thermal shutdown, and high ripple rejection.

  10. Is BA178M12T suitable for automotive applications?

    • Yes, BA178M12T is suitable for automotive applications with proper consideration of environmental conditions and requirements.