BDJ5FC0WEFJ-E2

Product Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: Surface Mount Technology (SMT)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 4.5V to 24V
• Output Voltage Range: 1.2V to 5.5V
• Output Current: Up to 3A
• Operating Temperature Range: -40°C to +85°C
• Efficiency: Up to 95%
• Quiescent Current: 50µA

Detailed Pin Configuration

The BDJ5FC0WEFJ-E2 has the following pin configuration:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage

Functional Features

• Wide input voltage range allows for versatile applications.
• High efficiency ensures minimal power loss.
• Low quiescent current enables energy-saving operation.
• Built-in protection features such as overcurrent and thermal shutdown.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption. - Wide input voltage range provides flexibility in various applications. - Compact SMT package saves board space. - Built-in protection features enhance reliability.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Requires external components for proper operation.

Working Principles

The BDJ5FC0WEFJ-E2 is a voltage regulator that converts an input voltage within the specified range into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) allows for control of the regulator's operation.

Detailed Application Field Plans

The BDJ5FC0WEFJ-E2 is commonly used in various applications, including:

1. Portable electronic devices: Provides regulated power supply for smartphones, tablets, and portable audio players.
2. Industrial equipment: Suitable for powering sensors, actuators, and control systems in industrial automation.
3. Automotive electronics: Used in automotive infotainment systems, lighting controls, and other vehicle electronics.
4. IoT devices: Enables efficient power management in Internet of Things devices such as smart home appliances and wearable devices.

Detailed and Complete Alternative Models

• BDJ5FC0WEFJ-E1: Similar specifications but with a different package option (Through-Hole Technology).
• BDJ5FC0WEFJ-E3: Higher output current capability (up to 5A) with similar input/output voltage ranges.
• BDJ5FC0WEFJ-E4: Lower quiescent current (20µA) for ultra-low power applications.

(Note: These alternative models are provided for reference and may have slight differences in features and characteristics.)

This concludes the encyclopedia entry for BDJ5FC0WEFJ-E2, covering its product details, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.