이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BR24C01-RMN6TP

BR24C01-RMN6TP

Product Overview

Category: Integrated Circuit (IC)

Use: Non-volatile Electrically Erasable Programmable Read-Only Memory (EEPROM)

Characteristics: - Low power consumption - High reliability - Small form factor - Wide operating voltage range

Package: RMN6TP (8-pin SOP package)

Essence: The BR24C01-RMN6TP is a small-sized EEPROM IC that provides non-volatile memory storage for various electronic devices.

Packaging/Quantity: The BR24C01-RMN6TP is typically sold in reels, with each reel containing 2500 units.

Specifications

  • Memory Capacity: 1 Kilobit (128 bytes)
  • Operating Voltage Range: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The BR24C01-RMN6TP features an 8-pin Small Outline Package (SOP) with the following pin configuration:

  1. VCC: Power supply voltage input
  2. SDA: Serial data input/output
  3. SCL: Serial clock input
  4. WP: Write protect input
  5. GND: Ground
  6. NC: No connection
  7. NC: No connection
  8. VSS: Ground

Functional Features

  • I2C-compatible serial interface for easy integration into various systems
  • Byte-wise and page-wise write operations
  • Software write protection for enhanced security
  • Self-timed programming cycle for simplified operation
  • Built-in write cycle detection and automatic write termination

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered devices - High reliability ensures data integrity over extended periods - Small form factor allows for space-efficient designs - Wide operating voltage range enables compatibility with different systems

Disadvantages: - Limited memory capacity may not be sufficient for certain applications - Slower write speed compared to some other EEPROMs - Lack of additional features like built-in error correction codes

Working Principles

The BR24C01-RMN6TP utilizes an electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping charges in a floating gate, which can be electrically erased and reprogrammed. The IC communicates with the host system through an I2C-compatible serial interface, allowing for easy data transfer and manipulation.

Detailed Application Field Plans

The BR24C01-RMN6TP is commonly used in various electronic devices that require non-volatile memory storage, such as: - Consumer electronics (e.g., TVs, set-top boxes) - Automotive systems (e.g., infotainment, instrument clusters) - Industrial control systems - Medical equipment - Smart meters

Detailed and Complete Alternative Models

  1. AT24C01A: 1 Kilobit I2C-Compatible EEPROM, offered by Microchip Technology Inc.
  2. CAT24C01: 1 Kilobit Serial EEPROM, manufactured by ON Semiconductor
  3. M24C01: 1 Kilobit I2C Bus EEPROM, produced by STMicroelectronics

These alternative models offer similar functionality and specifications to the BR24C01-RMN6TP and can be considered as replacements depending on specific requirements.

Word count: 389 words

기술 솔루션에 BR24C01-RMN6TP 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of BR24C01-RMN6TP in technical solutions:

  1. Q: What is BR24C01-RMN6TP? A: BR24C01-RMN6TP is a specific model of I2C serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ROHM Semiconductor.

  2. Q: What is the storage capacity of BR24C01-RMN6TP? A: BR24C01-RMN6TP has a storage capacity of 1 kilobit (128 bytes).

  3. Q: What is the operating voltage range for BR24C01-RMN6TP? A: The operating voltage range for BR24C01-RMN6TP is typically between 1.7V and 5.5V.

  4. Q: What is the maximum clock frequency supported by BR24C01-RMN6TP? A: BR24C01-RMN6TP supports a maximum clock frequency of 400 kHz.

  5. Q: Can BR24C01-RMN6TP be used for storing program code or firmware? A: Yes, BR24C01-RMN6TP can be used for storing small program code or firmware data.

  6. Q: Is BR24C01-RMN6TP suitable for high-speed data transfer applications? A: No, BR24C01-RMN6TP is not designed for high-speed data transfer applications due to its limited storage capacity and slower write speeds.

  7. Q: Can BR24C01-RMN6TP operate in harsh environmental conditions? A: BR24C01-RMN6TP has an extended temperature range of -40°C to +85°C, making it suitable for operation in various environmental conditions.

  8. Q: Does BR24C01-RMN6TP support hardware write protection? A: Yes, BR24C01-RMN6TP supports a built-in hardware write protection feature to prevent accidental data modification.

  9. Q: Can multiple BR24C01-RMN6TP devices be connected in a daisy-chain configuration? A: No, BR24C01-RMN6TP does not support daisy-chaining as it uses the I2C bus protocol which requires a unique address for each device.

  10. Q: What are some typical applications of BR24C01-RMN6TP? A: BR24C01-RMN6TP is commonly used in applications such as small embedded systems, smart cards, industrial control systems, and consumer electronics where low-cost non-volatile memory storage is required.

Please note that these answers are general and may vary depending on specific requirements and use cases.