이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
M24C08-RDS6TG

M24C08-RDS6TG

Product Overview

Category: Integrated Circuit (IC)

Use: Non-volatile memory storage

Characteristics: - 8-Kbit electrically erasable programmable read-only memory (EEPROM) - I2C bus interface - Low power consumption - High reliability and endurance - Wide operating voltage range - Small package size

Package: SO8 (Small Outline 8-pin package)

Essence: M24C08-RDS6TG is a high-performance EEPROM IC that provides non-volatile memory storage for various electronic devices.

Packaging/Quantity: The M24C08-RDS6TG is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Memory Capacity: 8 Kbits (1024 bytes)
  • Interface: I2C (Inter-Integrated Circuit) bus
  • Operating Voltage Range: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Time: 5 ms (maximum)
  • Data Retention: 200 years (minimum)
  • Endurance: 4 million write cycles (minimum)

Detailed Pin Configuration

The M24C08-RDS6TG has an 8-pin configuration as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | A0 | Address Input Bit 0 | | 2 | A1 | Address Input Bit 1 | | 3 | A2 | Address Input Bit 2 | | 4 | GND | Ground | | 5 | SDA | Serial Data Input/Output | | 6 | SCL | Serial Clock Input | | 7 | WP | Write Protect | | 8 | VCC | Power Supply Voltage |

Functional Features

  • Random and sequential read modes
  • Byte and page write modes
  • Software write protection
  • Hardware write protection using the WP pin
  • Acknowledge polling and interrupt functions for communication status monitoring
  • ESD (Electrostatic Discharge) protection

Advantages and Disadvantages

Advantages: - High reliability and endurance - Low power consumption - Wide operating voltage range - Small package size - Easy integration with I2C bus interface

Disadvantages: - Limited memory capacity compared to other EEPROMs - Relatively slower write time compared to some competing models

Working Principles

The M24C08-RDS6TG operates based on the principles of electrically erasable programmable read-only memory (EEPROM). It uses a floating gate transistor structure to store data in non-volatile memory cells. The I2C bus interface allows for easy communication with microcontrollers or other devices.

Detailed Application Field Plans

The M24C08-RDS6TG is widely used in various electronic devices that require non-volatile memory storage, such as: - Consumer electronics (e.g., TVs, set-top boxes, digital cameras) - Automotive systems (e.g., infotainment systems, engine control units) - Industrial equipment (e.g., measurement instruments, control systems) - Medical devices (e.g., patient monitors, diagnostic equipment)

Detailed and Complete Alternative Models

Some alternative models to the M24C08-RDS6TG include: - AT24C08 from Atmel - CAT24C08 from ON Semiconductor - 24AA08 from Microchip Technology

These alternative models offer similar functionality and can be considered as replacements depending on specific requirements and compatibility with existing designs.

Word count: 438 words

기술 솔루션에 M24C08-RDS6TG 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of M24C08-RDS6TG in technical solutions:

  1. Question: What is M24C08-RDS6TG?
    Answer: M24C08-RDS6TG is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by STMicroelectronics.

  2. Question: What is the storage capacity of M24C08-RDS6TG?
    Answer: The M24C08-RDS6TG has a storage capacity of 8 kilobits, which is equivalent to 1024 bytes or 1 kilobyte.

  3. Question: What is the operating voltage range for M24C08-RDS6TG?
    Answer: The operating voltage range for M24C08-RDS6TG is typically between 1.7V and 5.5V.

  4. Question: Can M24C08-RDS6TG be used in automotive applications?
    Answer: Yes, M24C08-RDS6TG is designed to meet the requirements of automotive applications and can operate in harsh environments.

  5. Question: What is the maximum clock frequency supported by M24C08-RDS6TG?
    Answer: The maximum clock frequency supported by M24C08-RDS6TG is 400 kHz.

  6. Question: Does M24C08-RDS6TG support both read and write operations?
    Answer: Yes, M24C08-RDS6TG supports both read and write operations, allowing data to be stored and retrieved from the memory.

  7. Question: Is M24C08-RDS6TG compatible with I2C communication protocol?
    Answer: Yes, M24C08-RDS6TG uses the I2C (Inter-Integrated Circuit) communication protocol, making it compatible with a wide range of microcontrollers and systems.

  8. Question: Can M24C08-RDS6TG be used in low-power applications?
    Answer: Yes, M24C08-RDS6TG has low power consumption and supports various power-saving modes, making it suitable for low-power applications.

  9. Question: What is the typical data retention time of M24C08-RDS6TG?
    Answer: The typical data retention time of M24C08-RDS6TG is 40 years, ensuring long-term storage of critical information.

  10. Question: Are there any specific programming requirements for M24C08-RDS6TG?
    Answer: M24C08-RDS6TG can be programmed using standard I2C commands, and the datasheet provides detailed instructions on how to program and access the memory.

Please note that these answers are general and may vary depending on the specific application and implementation of M24C08-RDS6TG.