STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
STD5N62K3
자세히보기 데이터시트

STD5N62K3

Product Overview

  • Category: Power MOSFET
  • Use: Switching applications in power supplies, lighting, and motor control
  • Characteristics: High voltage capability, low input capacitance, and fast switching speed
  • Package: TO-252 (DPAK)
  • Essence: Efficient power switching
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Voltage Rating: 650V
  • Current Rating: 4.5A
  • RDS(ON): 1.6Ω
  • Gate Threshold Voltage: 2.5V
  • Maximum Operating Temperature: 150°C

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • Low input and output capacitance for fast switching
  • High voltage capability for wide range of applications
  • Low RDS(ON) for reduced conduction losses

Advantages and Disadvantages

Advantages

  • Fast switching speed
  • Low input capacitance
  • High voltage capability

Disadvantages

  • Higher RDS(ON) compared to some alternative models
  • Limited current rating

Working Principles

The STD5N62K3 operates based on the principle of field-effect transistors, where the gate voltage controls the conductivity between the drain and source terminals. When a sufficient gate voltage is applied, the device switches on, allowing current to flow from the drain to the source.

Detailed Application Field Plans

The STD5N62K3 is suitable for various applications including: - Power supplies - Lighting systems - Motor control circuits

Detailed and Complete Alternative Models

  • STP5NK65ZFP
  • STD5N52U
  • STB5NC60T4

This concludes the detailed entry for the STD5N62K3 Power MOSFET, covering its product information, specifications, features, and application details.

Word Count: 298

기술 솔루션에 STD5N62K3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum drain-source voltage (VDS) of STD5N62K3?

    • The maximum drain-source voltage (VDS) of STD5N62K3 is 620 volts.

  2. What is the continuous drain current (ID) of STD5N62K3?

    • The continuous drain current (ID) of STD5N62K3 is 4.5 amperes.

  3. What is the on-state resistance (RDS(on)) of STD5N62K3?

    • The on-state resistance (RDS(on)) of STD5N62K3 is typically 2.5 ohms.

  4. Can STD5N62K3 be used in high-frequency switching applications?

    • Yes, STD5N62K3 can be used in high-frequency switching applications due to its fast switching characteristics.

  5. Is STD5N62K3 suitable for use in power supplies and inverters?

    • Yes, STD5N62K3 is suitable for use in power supplies and inverters due to its high voltage and current ratings.

  6. What is the operating temperature range of STD5N62K3?

    • The operating temperature range of STD5N62K3 is typically -55°C to 150°C.

  7. Does STD5N62K3 require a heat sink for proper thermal management?

    • Depending on the application and power dissipation, STD5N62K3 may require a heat sink for proper thermal management.

  8. What are the typical applications of STD5N62K3 in technical solutions?

    • Typical applications of STD5N62K3 include motor control, lighting, power management, and industrial automation.

  9. What are the key features that make STD5N62K3 suitable for technical solutions?

    • STD5N62K3 features low on-state resistance, high voltage capability, and fast switching speed, making it suitable for various technical solutions.

  10. Are there any important considerations when designing with STD5N62K3?

    • When designing with STD5N62K3, it's important to consider proper gate drive voltage, thermal management, and protection against overcurrent and overvoltage conditions.