제품 세부사항은 사양을 확인하세요.
STL8N65M2
Product Overview
STL8N65M2 belongs to the category of power MOSFETs. It is commonly used in electronic circuits for switching and amplification purposes. The characteristics of this product include high voltage capability, low on-resistance, and fast switching speed. The package type for STL8N65M2 is TO-220, and it is available in quantities of 50 per tube.
Specifications
- Voltage Rating: 650V
- Current Rating: 8A
- On-Resistance: 1.3Ω
- Package Type: TO-220
- Quantity: 50 per tube
Detailed Pin Configuration
The pin configuration for STL8N65M2 is as follows: - Pin 1: Gate - Pin 2: Drain - Pin 3: Source
Functional Features
STL8N65M2 offers the following functional features: - High voltage capability - Low on-resistance - Fast switching speed
Advantages and Disadvantages
Advantages
- High voltage capability makes it suitable for various applications
- Low on-resistance leads to reduced power dissipation
- Fast switching speed allows for efficient operation
Disadvantages
- Relatively higher cost compared to lower voltage MOSFETs
- Higher gate capacitance may require more complex drive circuitry
Working Principles
STL8N65M2 operates based on the principle of field-effect transistors. When a voltage is applied to the gate terminal, it creates an electric field that controls the flow of current between the drain and source terminals. This enables the MOSFET to act as a switch or amplifier in electronic circuits.
Detailed Application Field Plans
STL8N65M2 finds extensive use in various applications including: - Switching power supplies - Motor control - LED lighting - Audio amplifiers - Inverters
Detailed and Complete Alternative Models
Some alternative models to STL8N65M2 include: - STP8NM60N - IRF840 - FQP30N06L - IRL540
In conclusion, STL8N65M2 is a versatile power MOSFET with high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of electronic applications.
[Word count: 298]
기술 솔루션에 STL8N65M2 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the maximum drain-source voltage rating of the STL8N65M2 MOSFET?
- The maximum drain-source voltage rating of the STL8N65M2 is 650V.
What is the continuous drain current rating of the STL8N65M2 MOSFET?
- The continuous drain current rating of the STL8N65M2 is 8A.
What is the on-state resistance (RDS(on)) of the STL8N65M2 MOSFET?
- The on-state resistance (RDS(on)) of the STL8N65M2 is typically 1.4 ohms at a VGS of 10V.
Can the STL8N65M2 be used in high-frequency switching applications?
- Yes, the STL8N65M2 is suitable for high-frequency switching applications due to its low gate charge and fast switching characteristics.
What are the typical applications for the STL8N65M2 MOSFET?
- Typical applications for the STL8N65M2 include power supplies, motor control, lighting, and industrial equipment.
Does the STL8N65M2 require a heat sink for operation?
- The need for a heat sink depends on the specific application and the power dissipation requirements. In high-power applications, a heat sink may be necessary.
What is the maximum junction temperature of the STL8N65M2?
- The maximum junction temperature of the STL8N65M2 is 150°C.
Is the STL8N65M2 suitable for use in automotive applications?
- Yes, the STL8N65M2 is designed to meet automotive quality and reliability standards, making it suitable for automotive applications.
What is the gate-source voltage (VGS) required to fully enhance the STL8N65M2?
- The gate-source voltage (VGS) required to fully enhance the STL8N65M2 is typically 10V.
Are there any recommended driver ICs for controlling the STL8N65M2 in various applications?
- Several driver ICs from different manufacturers are compatible with the STL8N65M2, including those specifically designed for MOSFET gate driving in power electronics applications. It's important to select a driver IC that meets the specific requirements of the application.