STM8S105C6T6TR

Product Overview

• Category: Microcontroller
• Use: Embedded systems, IoT devices, consumer electronics
• Characteristics: Low power consumption, high performance, small form factor
• Package: TQFP-32
• Essence: 8-bit microcontroller with integrated peripherals
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Core: STM8 core running at up to 16 MHz
• Flash Memory: 32 KB
• RAM: 2 KB
• Operating Voltage: 2.95V to 5.5V
• I/O Pins: 32
• Timers: 3 x 16-bit timers, 1 x 8-bit timer
• Communication Interfaces: UART, SPI, I2C
• ADC: 10-bit, 5 channels
• PWM Channels: 4
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The STM8S105C6T6TR microcontroller has a total of 32 pins. The pin configuration is as follows:

1. PA0: General-purpose I/O pin
2. PA1: General-purpose I/O pin
3. PA2: General-purpose I/O pin
4. PA3: General-purpose I/O pin
5. PA4: General-purpose I/O pin
6. PA5: General-purpose I/O pin
7. PA6: General-purpose I/O pin
8. PA7: General-purpose I/O pin
9. PB0: General-purpose I/O pin
10. PB1: General-purpose I/O pin
11. PB2: General-purpose I/O pin
12. PB3: General-purpose I/O pin
13. PB4: General-purpose I/O pin
14. PB5: General-purpose I/O pin
15. PB6: General-purpose I/O pin
16. PB7: General-purpose I/O pin
17. PC0: General-purpose I/O pin
18. PC1: General-purpose I/O pin
19. PC2: General-purpose I/O pin
20. PC3: General-purpose I/O pin
21. PC4: General-purpose I/O pin
22. PC5: General-purpose I/O pin
23. PC6: General-purpose I/O pin
24. PC7: General-purpose I/O pin
25. PD0: General-purpose I/O pin
26. PD1: General-purpose I/O pin
27. PD2: General-purpose I/O pin
28. PD3: General-purpose I/O pin
29. PD4: General-purpose I/O pin
30. PD5: General-purpose I/O pin
31. PD6: General-purpose I/O pin
32. PD7: General-purpose I/O pin

Functional Features

• High-performance STM8 core for efficient processing
• Low power consumption for extended battery life
• Integrated peripherals such as UART, SPI, and I2C for communication
• 10-bit ADC for analog signal acquisition
• PWM channels for precise control of output signals
• Multiple timers for accurate timing operations

Advantages and Disadvantages

Advantages: - Compact size and low power consumption make it suitable for portable devices - Integrated peripherals reduce the need for external components - Cost-effective solution for various applications

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers - Limited number of I/O pins may restrict the complexity of projects

Working Principles

The STM8S105C6T6TR microcontroller operates based on the STM8 core architecture. It executes instructions stored in its flash memory and interacts with external devices through its integrated peripherals. The core's clock speed determines the processing speed of the microcontroller. It can communicate with other devices using UART, SPI, and I2C interfaces. The ADC allows it to convert analog signals into digital values, while the PWM channels enable precise control of output signals.

Detailed Application Field Plans

The STM8S105C6T6TR microcontroller finds applications in various fields, including:

1. Embedded Systems: Used in industrial automation, home automation, and automotive systems.
2. IoT Devices: Enables connectivity and control in smart home devices, wearables, and environmental monitoring systems.
3. Consumer Electronics: Powers small appliances, remote controls, and electronic toys.
4. Medical Devices: Used in portable medical equipment and patient monitoring systems.
5. Automotive Electronics: Controls various functions in vehicles, such as lighting, climate control, and infotainment systems.

Detailed and Complete Alternative Models

1. STM8S003F3P6: Similar 8-bit microcontroller with lower flash memory and fewer peripherals.
2. STM32F103C8T6: 32-bit microcontroller with higher performance and more advanced features