STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
STP4NK50Z
자세히보기 데이터시트

STP4NK50Z

Introduction

The STP4NK50Z is a power MOSFET belonging to the category of electronic components. It is commonly used in various electronic circuits and applications due to its specific characteristics and performance.

Basic Information Overview

  • Category: Power MOSFET
  • Use: The STP4NK50Z is utilized as a switching device in power supply units, motor control, lighting systems, and other electronic applications.
  • Characteristics: This MOSFET exhibits low on-state resistance, high switching speed, and low gate charge, making it suitable for high-efficiency power management.
  • Package: The STP4NK50Z is typically available in a TO-220 package, which provides thermal efficiency and ease of mounting.
  • Essence: Its essence lies in providing efficient power switching capabilities in electronic circuits.
  • Packaging/Quantity: It is commonly supplied in reels or tubes containing multiple units, depending on the manufacturer's specifications.

Specifications

  • Voltage Rating: 500V
  • Current Rating: 4A
  • On-State Resistance (RDS(on)): 1.4Ω
  • Gate-Source Voltage (VGS): ±30V
  • Operating Temperature Range: -55°C to 150°C
  • Package Type: TO-220

Detailed Pin Configuration

The STP4NK50Z typically features three pins: 1. Gate (G): Input pin for controlling the switching operation. 2. Drain (D): Output pin connected to the load or circuit being controlled. 3. Source (S): Common pin serving as the reference point for the MOSFET.

Functional Features

  • Low On-State Resistance: Enables efficient power transfer with minimal voltage drop.
  • High Switching Speed: Facilitates rapid switching transitions, suitable for high-frequency applications.
  • Low Gate Charge: Allows for quick and precise control of the MOSFET.

Advantages and Disadvantages

Advantages

  • High efficiency in power management applications.
  • Fast switching speed enhances overall system performance.
  • Low on-state resistance minimizes power losses.

Disadvantages

  • Susceptible to damage from overvoltage or overcurrent conditions.
  • Requires careful consideration of drive circuitry to prevent damage during switching operations.

Working Principles

The STP4NK50Z operates based on the principles of field-effect transistors, where the application of a voltage at the gate terminal controls the flow of current between the drain and source terminals. When the gate-source voltage reaches the threshold, the MOSFET enters the conducting state, allowing current to flow through the device.

Detailed Application Field Plans

The STP4NK50Z finds extensive use in the following applications: - Power Supply Units: Utilized in switch-mode power supplies for efficient voltage regulation. - Motor Control: Employed in motor drive circuits for precise speed and direction control. - Lighting Systems: Used in LED drivers and ballast circuits for efficient power management.

Detailed and Complete Alternative Models

Several alternative models with similar characteristics and performance include: - IRF540N - FQP30N06L - IRL540N - STP5NK50ZFP

In conclusion, the STP4NK50Z power MOSFET offers high-performance characteristics suitable for a wide range of electronic applications, making it a popular choice among design engineers and electronic enthusiasts.

[Word Count: 515]

기술 솔루션에 STP4NK50Z 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is STP4NK50Z?

    • STP4NK50Z is a N-channel Power MOSFET designed for high-voltage, high-speed power switching applications.

  2. What are the key features of STP4NK50Z?

    • The key features include a low on-resistance, high voltage capability, fast switching speed, and low gate charge.

  3. What are the typical applications of STP4NK50Z?

    • Typical applications include switch mode power supplies, electronic lamp ballasts, motor control, and automotive systems.

  4. What is the maximum voltage and current rating of STP4NK50Z?

    • The maximum voltage rating is 500V and the continuous drain current rating is 4A.

  5. What is the on-resistance of STP4NK50Z?

    • The on-resistance is typically around 1.4 ohms.

  6. Does STP4NK50Z require a heat sink for operation?

    • It depends on the specific application and the power dissipation requirements. In high-power applications, a heat sink may be necessary.

  7. Is STP4NK50Z suitable for use in automotive electronics?

    • Yes, STP4NK50Z is suitable for automotive systems such as engine control units, transmission control units, and lighting systems.

  8. What are the recommended operating conditions for STP4NK50Z?

    • The recommended operating temperature range is -55°C to 150°C, and the maximum junction temperature is 150°C.

  9. Can STP4NK50Z be used in high-frequency switching applications?

    • Yes, STP4NK50Z is designed for high-speed switching applications.

  10. Are there any important considerations for driving the gate of STP4NK50Z?

    • It is important to ensure proper gate drive voltage and current to achieve fast and efficient switching performance. Additionally, attention should be paid to minimizing ringing and overshoot in the gate drive circuit.