STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
STU25N10F7

STU25N10F7

Introduction

The STU25N10F7 is a power MOSFET belonging to the category of semiconductor devices. This device is commonly used in electronic circuits for its high efficiency and low on-state resistance characteristics. The STU25N10F7 is designed to be used in various applications where power switching and amplification are required.

Basic Information Overview

  • Category: Power MOSFET
  • Use: Power switching and amplification in electronic circuits
  • Characteristics: High efficiency, low on-state resistance
  • Package: TO-220FP
  • Essence: Efficient power management
  • Packaging/Quantity: Typically packaged in reels of 250 or 500 units

Specifications

  • Voltage Rating: 100V
  • Current Rating: 25A
  • On-State Resistance: 0.07Ω
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The STU25N10F7 features a standard TO-220FP pin configuration with three pins: 1. Gate (G): Input terminal for controlling the MOSFET's conductivity. 2. Drain (D): Output terminal through which the main current flows. 3. Source (S): Terminal connected to the ground reference.

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low gate drive power loss
  • Avalanche energy specified
  • Improved dv/dt capability

Advantages and Disadvantages

Advantages

  • High efficiency in power management
  • Low on-state resistance reduces power dissipation
  • Fast switching speed enhances circuit performance

Disadvantages

  • Sensitivity to static electricity
  • Limited voltage and current ratings compared to some alternative models

Working Principles

The STU25N10F7 operates based on the principle of field-effect transistors, utilizing the control of an electric field to modulate the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate terminal, the MOSFET allows current to flow from the drain to the source, effectively acting as a switch or amplifier in electronic circuits.

Detailed Application Field Plans

The STU25N10F7 is widely used in various applications including: - Switching power supplies - Motor control - LED lighting - Audio amplifiers - DC-DC converters

Detailed and Complete Alternative Models

Some alternative models to the STU25N10F7 include: - IRF540N - FQP30N06L - IRLB8748

In conclusion, the STU25N10F7 power MOSFET offers high efficiency and low on-state resistance, making it suitable for a wide range of power switching and amplification applications.

[Word count: 398]

기술 솔루션에 STU25N10F7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum drain-source voltage for STU25N10F7?

    • The maximum drain-source voltage for STU25N10F7 is 100V.

  2. What is the continuous drain current rating for STU25N10F7?

    • The continuous drain current rating for STU25N10F7 is 25A.

  3. What is the on-resistance (RDS(on)) of STU25N10F7?

    • The on-resistance (RDS(on)) of STU25N10F7 is typically 0.07 ohms.

  4. What is the gate threshold voltage for STU25N10F7?

    • The gate threshold voltage for STU25N10F7 is typically 2.5V.

  5. Can STU25N10F7 be used in automotive applications?

    • Yes, STU25N10F7 is suitable for automotive applications.

  6. What is the operating temperature range for STU25N10F7?

    • The operating temperature range for STU25N10F7 is -55°C to 175°C.

  7. Is STU25N10F7 suitable for use in switching power supplies?

    • Yes, STU25N10F7 is commonly used in switching power supply applications.

  8. Does STU25N10F7 require a heat sink for high-power applications?

    • It is recommended to use a heat sink for high-power applications with STU25N10F7.

  9. What type of package does STU25N10F7 come in?

    • STU25N10F7 is available in a TO-220 package.

  10. Are there any application notes or reference designs available for using STU25N10F7?

    • Yes, application notes and reference designs are available to assist in using STU25N10F7 in technical solutions.