STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
UC2845BD1013TR
자세히보기 데이터시트

UC2845BD1013TR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: PWM Controller
  • Characteristics: High-performance, current-mode PWM controller
  • Package: SOIC-8
  • Essence: Regulates and controls the output voltage of power supplies
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 7V to 30V
  • Output Voltage Range: 0.8V to 28V
  • Maximum Duty Cycle: 100%
  • Oscillator Frequency Range: 50kHz to 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VREF: Reference voltage input
  2. COMP: Error amplifier output
  3. FB: Feedback voltage input
  4. RT/CT: Timing resistor/capacitor connection
  5. GND: Ground
  6. OUT: Output voltage
  7. CS: Current sense input
  8. VCC: Supply voltage input

Functional Features

  • Current-mode control architecture
  • Adjustable output voltage
  • Soft-start capability
  • Overcurrent protection
  • Under-voltage lockout
  • Error amplifier with high gain

Advantages

  • Wide input voltage range allows for versatile applications
  • High-performance controller ensures stable and efficient power supply operation
  • Adjustable output voltage provides flexibility in various power supply designs
  • Soft-start feature prevents excessive inrush current during startup
  • Overcurrent protection safeguards against potential damage to the system
  • Under-voltage lockout prevents operation at low input voltages
  • Error amplifier with high gain enables precise regulation of the output voltage

Disadvantages

  • Limited operating temperature range (-40°C to +85°C)
  • Requires external timing resistor and capacitor for proper operation

Working Principles

The UC2845BD1013TR is a current-mode PWM controller that regulates and controls the output voltage of power supplies. It operates by comparing the feedback voltage (FB) with a reference voltage (VREF) to generate an error signal. This error signal is then amplified and used to control the duty cycle of the output waveform, which in turn adjusts the output voltage. By continuously monitoring the output voltage and adjusting the duty cycle accordingly, the UC2845BD1013TR ensures stable and accurate regulation.

Detailed Application Field Plans

The UC2845BD1013TR is commonly used in various applications, including: - Switching power supplies - DC-DC converters - Battery chargers - LED drivers - Motor control circuits

Detailed and Complete Alternative Models

Some alternative models to the UC2845BD1013TR include: - UC3845B: Similar functionality, but with extended temperature range (-40°C to +105°C) - SG3525A: Higher frequency range (100kHz to 500kHz) and wider input voltage range (8V to 35V) - TL494: Dual-channel PWM controller with adjustable dead time and shutdown function

Note: The above alternatives are just a few examples, and there are many other similar ICs available in the market.

In conclusion, the UC2845BD1013TR is a high-performance current-mode PWM controller used in various power supply applications. Its adjustable output voltage, soft-start capability, and overcurrent protection make it a versatile choice for designers. However, its limited operating temperature range and requirement for external timing components should be taken into consideration during system design.

기술 솔루션에 UC2845BD1013TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of UC2845BD1013TR in technical solutions:

  1. Q: What is UC2845BD1013TR?
    A: UC2845BD1013TR is a pulse width modulation (PWM) controller IC used for controlling power converters.

  2. Q: What are the typical applications of UC2845BD1013TR?
    A: UC2845BD1013TR is commonly used in switch-mode power supplies, battery chargers, LED drivers, and motor control circuits.

  3. Q: What is the operating voltage range of UC2845BD1013TR?
    A: The operating voltage range of UC2845BD1013TR is typically between 7V and 30V.

  4. Q: How does UC2845BD1013TR regulate the output voltage?
    A: UC2845BD1013TR uses a feedback mechanism to regulate the duty cycle of the PWM signal, which in turn regulates the output voltage.

  5. Q: Can UC2845BD1013TR handle high currents?
    A: No, UC2845BD1013TR is a controller IC and cannot handle high currents directly. It requires external power devices such as MOSFETs or transistors to handle high currents.

  6. Q: What is the maximum switching frequency of UC2845BD1013TR?
    A: The maximum switching frequency of UC2845BD1013TR is typically around 500 kHz.

  7. Q: Does UC2845BD1013TR have built-in protection features?
    A: Yes, UC2845BD1013TR has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  8. Q: Can UC2845BD1013TR operate in a wide temperature range?
    A: Yes, UC2845BD1013TR is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  9. Q: Can I use UC2845BD1013TR in both buck and boost converter configurations?
    A: Yes, UC2845BD1013TR can be used in both buck and boost converter configurations, as well as in flyback and forward converter topologies.

  10. Q: Are there any application notes or reference designs available for UC2845BD1013TR?
    A: Yes, the manufacturer of UC2845BD1013TR provides application notes and reference designs that can help in implementing the IC in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.