Taiwan Semiconductor Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ES1BHR3G
자세히보기 데이터시트

ES1BHR3G Product Overview

Introduction

The ES1BHR3G is a high-performance diode belonging to the category of semiconductor devices. This entry provides an in-depth overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Devices
  • Use: Rectification and voltage regulation in electronic circuits
  • Characteristics: High efficiency, low forward voltage drop, fast switching speed
  • Package: SOD-123FL
  • Essence: Silicon Schottky Diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage Drop (VF): 0.45V at 1A
  • Reverse Voltage (VR): 30V
  • Average Rectified Current (IO): 1A
  • Peak Forward Surge Current (IFSM): 30A
  • Operating Temperature Range: -65°C to +125°C

Detailed Pin Configuration

The ES1BHR3G has a standard SOD-123FL package with two pins. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast Switching Speed: Enables rapid response in electronic circuits.
  • Low Forward Voltage Drop: Minimizes power dissipation and enhances energy efficiency.
  • High Surge Current Capability: Suitable for applications requiring robust transient protection.

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Fast Switching Speed
  • Low Power Dissipation

Disadvantages

  • Limited Reverse Voltage Rating
  • Sensitivity to Overvoltage Conditions

Working Principles

The ES1BHR3G operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes. When a forward bias is applied, the diode conducts current with minimal voltage loss, making it suitable for high-frequency and low-voltage applications.

Detailed Application Field Plans

The ES1BHR3G is widely used in various electronic circuits and systems, including: - Power Supplies - Voltage Regulators - Switching Converters - LED Lighting - Automotive Electronics

Detailed and Complete Alternative Models

For applications requiring similar performance characteristics, alternative models to the ES1BHR3G include: - SS12 - SB130 - BAT54S

In conclusion, the ES1BHR3G is a versatile semiconductor device with high efficiency, fast switching speed, and low forward voltage drop, making it suitable for a wide range of electronic applications.

[Word Count: 410]

기술 솔루션에 ES1BHR3G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is ES1BHR3G?

    • ES1BHR3G is a high-speed, low-loss, Schottky barrier diode designed for use in various technical solutions.

  2. What are the key features of ES1BHR3G?

    • The key features of ES1BHR3G include its high-speed switching capability, low forward voltage drop, and low reverse leakage current.

  3. In what technical applications can ES1BHR3G be used?

    • ES1BHR3G is commonly used in power supply circuits, freewheeling diodes, polarity protection diodes, and other applications requiring high-speed switching and low power loss.

  4. What is the maximum forward voltage of ES1BHR3G?

    • The maximum forward voltage of ES1BHR3G is typically around 0.55V at a forward current of 1A.

  5. What is the reverse recovery time of ES1BHR3G?

    • The reverse recovery time of ES1BHR3G is typically very fast, in the range of nanoseconds, making it suitable for high-frequency applications.

  6. Does ES1BHR3G have a high temperature tolerance?

    • Yes, ES1BHR3G is designed to operate at high temperatures, with a maximum junction temperature of up to 150°C.

  7. What is the typical package type for ES1BHR3G?

    • ES1BHR3G is commonly available in a surface mount SMA package, which is suitable for automated assembly processes.

  8. Can ES1BHR3G be used in automotive applications?

    • Yes, ES1BHR3G is often used in automotive electronics due to its high-speed performance and reliability.

  9. What are the storage and operating temperature ranges for ES1BHR3G?

    • The storage temperature range for ES1BHR3G is typically -55°C to 150°C, while the operating temperature range is usually -55°C to 125°C.

  10. Is ES1BHR3G RoHS compliant?

    • Yes, ES1BHR3G is generally compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious applications.