Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
COP8SAA728M8
자세히보기 데이터시트

COP8SAA728M8

Product Overview

Category

The COP8SAA728M8 belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications that require low power consumption and high performance.

Characteristics

  • Low power consumption
  • High performance
  • Embedded application support

Package

The COP8SAA728M8 comes in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of this microcontroller lies in its ability to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The COP8SAA728M8 is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 12 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 256 bytes
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 28
  • Timers/Counters: 2
  • Communication Interfaces: SPI, UART
  • ADC Channels: 8
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The COP8SAA728M8 has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. P0.0 - General-purpose I/O pin
  3. P0.1 - General-purpose I/O pin
  4. P0.2 - General-purpose I/O pin
  5. P0.3 - General-purpose I/O pin
  6. P0.4 - General-purpose I/O pin
  7. P0.5 - General-purpose I/O pin
  8. P0.6 - General-purpose I/O pin
  9. P0.7 - General-purpose I/O pin
  10. RESET - Reset pin
  11. XTAL1 - Crystal oscillator input
  12. XTAL2 - Crystal oscillator output
  13. P1.0 - General-purpose I/O pin
  14. P1.1 - General-purpose I/O pin
  15. P1.2 - General-purpose I/O pin
  16. P1.3 - General-purpose I/O pin
  17. P1.4 - General-purpose I/O pin
  18. P1.5 - General-purpose I/O pin
  19. P1.6 - General-purpose I/O pin
  20. P1.7 - General-purpose I/O pin
  21. VSS - Ground
  22. ADC0 - Analog-to-digital converter input
  23. ADC1 - Analog-to-digital converter input
  24. ADC2 - Analog-to-digital converter input
  25. ADC3 - Analog-to-digital converter input
  26. ADC4 - Analog-to-digital converter input
  27. ADC5 - Analog-to-digital converter input
  28. ADC6 - Analog-to-digital converter input

Functional Features

  • Low power consumption: The COP8SAA728M8 is designed to operate efficiently with minimal power requirements, making it suitable for battery-powered applications.
  • High performance: With a CPU speed of up to 12 MHz and ample program memory, this microcontroller offers fast and reliable processing capabilities.
  • Embedded application support: The COP8SAA728M8 provides various features and peripherals that are essential for embedded applications, such as timers/counters, communication interfaces, and analog-to-digital converters.

Advantages and Disadvantages

Advantages

  • Low power consumption enables longer battery life in portable devices.
  • High-performance CPU allows for efficient execution of complex tasks.
  • Ample program memory and RAM provide flexibility for application development.
  • Embedded application support simplifies integration into various projects.

Disadvantages

  • Limited I/O pins may restrict the number of external devices that can be connected directly.
  • 8-bit architecture may not be suitable for applications requiring extensive computational capabilities.

Working Principles

The COP8SAA728M8 operates based on an 8-bit architecture, where instructions are executed sequentially. It utilizes a combination of hardware and software to perform tasks as per the programmed instructions. The microcontroller communicates with external devices through its I/O pins, utilizing timers/counters and communication interfaces for data exchange. The analog-to-digital converters enable the microcontroller to interface with analog sensors or signals.

Detailed Application Field Plans

The COP8SAA728M8 is well-suited for a wide range of embedded applications, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Internet of Things (IoT) devices
  4. Consumer electronics
  5. Medical devices
  6. Automotive electronics
  7. Robotics

Detailed and Complete Alternative Models

  1. COP8

기술 솔루션에 COP8SAA728M8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of COP8SAA728M8 in technical solutions:

  1. Question: What is the COP8SAA728M8 microcontroller used for?
    Answer: The COP8SAA728M8 microcontroller is commonly used for various technical applications that require embedded control, such as industrial automation, consumer electronics, and automotive systems.

  2. Question: What is the maximum clock frequency supported by the COP8SAA728M8?
    Answer: The COP8SAA728M8 microcontroller supports a maximum clock frequency of 20 MHz.

  3. Question: How many I/O pins does the COP8SAA728M8 have?
    Answer: The COP8SAA728M8 has a total of 28 I/O pins, which can be configured as inputs or outputs based on the application requirements.

  4. Question: Does the COP8SAA728M8 support analog-to-digital conversion (ADC)?
    Answer: Yes, the COP8SAA728M8 features an integrated 8-channel 10-bit ADC, allowing it to measure analog signals and convert them into digital values.

  5. Question: Can the COP8SAA728M8 communicate with other devices?
    Answer: Absolutely! The microcontroller supports multiple communication interfaces, including UART, SPI, and I2C, enabling seamless interaction with external devices like sensors, displays, and memory modules.

  6. Question: What is the program memory size of the COP8SAA728M8?
    Answer: The COP8SAA728M8 has a program memory size of 8 KB, which allows for storing the firmware or code required to run the desired application.

  7. Question: Does the COP8SAA728M8 have any built-in timers or counters?
    Answer: Yes, the microcontroller includes two 8-bit timers/counters that can be utilized for various timing and counting operations in your technical solution.

  8. Question: Can I use interrupts with the COP8SAA728M8?
    Answer: Absolutely! The COP8SAA728M8 supports both external and internal interrupts, allowing you to respond to specific events or signals in a timely manner.

  9. Question: What is the operating voltage range of the COP8SAA728M8?
    Answer: The COP8SAA728M8 operates within a voltage range of 2.7V to 5.5V, making it compatible with a wide range of power supply options.

  10. Question: Is there any development toolchain available for programming the COP8SAA728M8?
    Answer: Yes, the COP8SAA728M8 can be programmed using the dedicated development tools provided by the manufacturer, including an integrated development environment (IDE) and a programmer/debugger.

Please note that these questions and answers are general and may vary based on specific application requirements and the manufacturer's documentation.