Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
DS36C280TMX/NOPB
자세히보기 데이터시트

DS36C280TMX/NOPB

Product Overview

Category

The DS36C280TMX/NOPB belongs to the category of high-speed differential line drivers.

Use

It is used for transmitting high-speed digital signals over twisted-pair copper or fiber optic cables.

Characteristics

  • High-speed data transmission
  • Differential signaling
  • Low power consumption
  • Robust design for industrial applications

Package

The DS36C280TMX/NOPB is available in a small-outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to reliably transmit high-speed digital signals over long distances while maintaining signal integrity.

Packaging/Quantity

The DS36C280TMX/NOPB is typically packaged in reels and is available in quantities suitable for both prototyping and production.

Specifications

  • Data Rate: Up to 3.125 Gbps
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOIC

Detailed Pin Configuration

The DS36C280TMX/NOPB has a total of 16 pins, including differential input and output pins, power supply pins, and control pins. A detailed pin configuration diagram can be found in the product datasheet.

Functional Features

  • Differential inputs and outputs for noise immunity
  • Wide operating temperature range for industrial applications
  • Low power consumption for energy efficiency
  • Built-in protection features for robustness

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Robust design for industrial environments
  • Low power consumption

Disadvantages

  • Limited data rate compared to some newer alternatives
  • May require additional components for specific applications

Working Principles

The DS36C280TMX/NOPB operates on the principle of differential signaling, where data is transmitted as the difference between two voltages. This allows for greater noise immunity and longer transmission distances compared to single-ended signaling.

Detailed Application Field Plans

The DS36C280TMX/NOPB is commonly used in industrial automation, telecommunications, and networking equipment where reliable high-speed data transmission over long distances is required. It is also suitable for use in medical imaging systems and test and measurement equipment.

Detailed and Complete Alternative Models

Some alternative models to the DS36C280TMX/NOPB include the DS90CF364MTD/NOPB and the SN65LVDS179DGK. These models offer similar functionality and are suitable replacements depending on specific application requirements.

In conclusion, the DS36C280TMX/NOPB is a reliable high-speed differential line driver with robust characteristics suitable for various industrial and communication applications. Its efficient data transmission and wide operating temperature range make it a valuable component in modern electronic systems.

Word Count: 410

기술 솔루션에 DS36C280TMX/NOPB 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is DS36C280TMX/NOPB?

    • DS36C280TMX/NOPB is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates.

  2. What is the operating voltage range of DS36C280TMX/NOPB?

    • The operating voltage range of DS36C280TMX/NOPB is from 3V to 5.5V.

  3. What is the maximum data rate supported by DS36C280TMX/NOPB?

    • DS36C280TMX/NOPB supports a maximum data rate of 250Mbps.

  4. What are the typical applications of DS36C280TMX/NOPB?

    • Typical applications of DS36C280TMX/NOPB include high-speed differential line driving, clock distribution, and point-to-point data transmission.

  5. Does DS36C280TMX/NOPB support hot-plugging?

    • Yes, DS36C280TMX/NOPB supports hot-plugging, making it suitable for hot-swappable systems.

  6. What is the power dissipation of DS36C280TMX/NOPB?

    • The power dissipation of DS36C280TMX/NOPB is typically 50mW per channel at 250Mbps.

  7. Is DS36C280TMX/NOPB compatible with LVDS standards?

    • Yes, DS36C280TMX/NOPB is compatible with LVDS (Low Voltage Differential Signaling) standards.

  8. What is the temperature range for operation of DS36C280TMX/NOPB?

    • DS36C280TMX/NOPB can operate within a temperature range of -40°C to 85°C.

  9. Does DS36C280TMX/NOPB have built-in ESD protection?

    • Yes, DS36C280TMX/NOPB features built-in ESD protection, ensuring robustness in real-world applications.

  10. Can DS36C280TMX/NOPB be used in industrial automation systems?

    • Yes, DS36C280TMX/NOPB is suitable for use in industrial automation systems due to its high-speed and low-power characteristics.