이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
LM34917ATL/NOPB

LM34917ATL/NOPB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: Thin Shrink Small Outline Package (TSSOP)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.2V to 37V
  • Quiescent Current: 25µA
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LM34917ATL/NOPB has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. SW: Switching node pin
  6. VOUT: Output voltage pin

Functional Features

  • High efficiency up to 95%
  • Low quiescent current for improved power savings
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage through feedback pin
  • Overcurrent protection and thermal shutdown features

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range enables compatibility with various power sources - Low quiescent current enhances energy efficiency - Overcurrent protection ensures safe operation - Thermal shutdown prevents damage due to excessive heat

Disadvantages: - Limited output voltage range compared to some other voltage regulators - Requires external components for proper operation

Working Principles

The LM34917ATL/NOPB is a voltage regulator that operates by converting the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin allows for adjustable output voltage, which is compared to a reference voltage internally. The device adjusts the duty cycle of the internal switch to maintain the desired output voltage.

Detailed Application Field Plans

The LM34917ATL/NOPB can be used in various applications, including but not limited to: - Industrial automation systems - Automotive electronics - Power supplies for consumer electronics - LED lighting systems - Battery charging circuits

Detailed and Complete Alternative Models

  1. LM34918ATL/NOPB: Similar specifications with higher output voltage range (up to 60V)
  2. LM34916ATL/NOPB: Similar specifications with lower output voltage range (down to 0.8V)
  3. LM34915ATL/NOPB: Similar specifications with lower quiescent current (10µA)

These alternative models provide flexibility based on specific application requirements.

Word count: 275 words

기술 솔루션에 LM34917ATL/NOPB 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the input voltage range of LM34917ATL/NOPB?
    - The input voltage range of LM34917ATL/NOPB is 4.5V to 60V.

  2. What is the maximum output current of LM34917ATL/NOPB?
    - The maximum output current of LM34917ATL/NOPB is 3A.

  3. Can LM34917ATL/NOPB be used in automotive applications?
    - Yes, LM34917ATL/NOPB is suitable for automotive applications.

  4. What is the typical efficiency of LM34917ATL/NOPB?
    - The typical efficiency of LM34917ATL/NOPB is 95%.

  5. Does LM34917ATL/NOPB have overcurrent protection?
    - Yes, LM34917ATL/NOPB features overcurrent protection.

  6. What is the operating temperature range of LM34917ATL/NOPB?
    - The operating temperature range of LM34917ATL/NOPB is -40°C to 125°C.

  7. Can LM34917ATL/NOPB be used in industrial control systems?
    - Yes, LM34917ATL/NOPB is suitable for use in industrial control systems.

  8. What type of package does LM34917ATL/NOPB come in?
    - LM34917ATL/NOPB is available in a 20-pin HTSSOP package.

  9. Does LM34917ATL/NOPB require an external compensation network?
    - No, LM34917ATL/NOPB has internal compensation.

  10. Is there a minimum input voltage requirement for LM34917ATL/NOPB?
    - Yes, the minimum input voltage requirement for LM34917ATL/NOPB is 4.5V.