Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MSP430FR5989IRGCR
자세히보기 데이터시트

MSP430FR5989IRGCR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices
  • Characteristics: Low power consumption, high performance, integrated peripherals
  • Package: 64-pin VQFN package
  • Essence: A microcontroller designed for low-power applications with integrated FRAM memory and various peripherals
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 16-bit RISC
  • CPU Speed: Up to 16 MHz
  • Flash Memory: 128 KB
  • RAM: 4 KB
  • FRAM: 2 KB
  • Operating Voltage Range: 1.8V to 3.6V
  • Digital I/O Pins: 48
  • Analog Inputs: 24
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 4x 16-bit timers, 1x 32-bit timer
  • ADC: 12-bit SAR ADC with 16 channels
  • DMA Channels: 8
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MSP430FR5989IRGCR has a total of 64 pins. The pin configuration is as follows:

  • P1.x: General-purpose I/O pins
  • P2.x: General-purpose I/O pins
  • P3.x: General-purpose I/O pins
  • P4.x: General-purpose I/O pins
  • P5.x: General-purpose I/O pins
  • P6.x: General-purpose I/O pins
  • P7.x: General-purpose I/O pins
  • P8.x: General-purpose I/O pins
  • P9.x: General-purpose I/O pins
  • P10.x: General-purpose I/O pins
  • P11.x: General-purpose I/O pins
  • P12.x: General-purpose I/O pins
  • PJ.x: JTAG pins

Functional Features

  • Ultra-low power consumption for battery-powered applications
  • Integrated FRAM memory for non-volatile data storage
  • Multiple communication interfaces for connectivity options
  • Rich set of integrated peripherals for versatile applications
  • High-performance 16-bit RISC CPU for efficient processing
  • Flexible and configurable digital and analog I/O pins
  • Built-in timers and ADC for precise timing and measurement

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices - FRAM memory provides fast and reliable non-volatile data storage - Integrated peripherals reduce the need for external components - Versatile I/O pins allow for flexible system configurations - Wide operating voltage range enables compatibility with various power sources

Disadvantages: - Limited flash memory capacity compared to some other microcontrollers - Higher cost compared to some lower-end microcontrollers - Complex pin configuration may require careful planning during PCB design

Working Principles

The MSP430FR5989IRGCR operates based on the von Neumann architecture, where program instructions and data are stored in the same memory space. It uses a 16-bit RISC CPU to execute instructions and control the operation of various peripherals. The microcontroller can be programmed using high-level languages such as C or assembly language.

The FRAM memory technology used in this microcontroller combines the advantages of both Flash memory and RAM. It offers fast write speeds, high endurance, and low power consumption. The integrated peripherals, such as UART, SPI, I2C, and USB, enable communication with other devices. The timers and ADC provide precise timing and analog signal acquisition capabilities.

Detailed Application Field Plans

The MSP430FR5989IRGCR is suitable for a wide range of applications, including but not limited to:

  1. Internet of Things (IoT) devices: The low power consumption and integrated peripherals make it ideal for IoT applications such as smart home devices, environmental monitoring systems, and wearable devices.
  2. Industrial automation: The microcontroller can be used in industrial control systems, motor control applications, and sensor data acquisition.
  3. Medical devices: Its low power consumption and integrated analog features make it suitable for portable medical devices, patient monitoring systems, and medical sensors.
  4. Energy management: The microcontroller can be used in energy-efficient systems for smart grid applications, energy monitoring, and control.
  5. Consumer electronics: It can be utilized in various consumer electronic devices such as remote controls, smart appliances, and gaming peripherals.

Detailed and Complete Alternative Models

  • MSP430FR5994IRGCR
  • MSP430FR5988IRGCR
  • MSP430FR5987IRGCR
  • MSP430FR5986IRGCR
  • MSP430FR5985IRGCR

These alternative models are part of the same MSP430FRx9x series and offer similar features and performance. The choice among these models depends on

기술 솔루션에 MSP430FR5989IRGCR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the MSP430FR5989IRGCR?
    Answer: The MSP430FR5989IRGCR is a microcontroller from Texas Instruments' MSP430 family, specifically designed for low-power applications.

  2. Question: What are the key features of the MSP430FR5989IRGCR?
    Answer: Some key features of the MSP430FR5989IRGCR include ultra-low power consumption, integrated FRAM memory, multiple communication interfaces (UART, SPI, I2C), and a wide range of peripherals.

  3. Question: What is FRAM memory, and why is it important in the MSP430FR5989IRGCR?
    Answer: FRAM (Ferroelectric Random Access Memory) is a non-volatile memory technology that combines the benefits of both Flash and RAM. It allows for fast read/write operations, low power consumption, and high endurance, making it ideal for data logging and other applications where frequent writes are required.

  4. Question: Can the MSP430FR5989IRGCR be used in battery-powered applications?
    Answer: Yes, the MSP430FR5989IRGCR is well-suited for battery-powered applications due to its ultra-low power consumption. It has various power-saving modes and features that help extend battery life.

  5. Question: What programming language can be used to program the MSP430FR5989IRGCR?
    Answer: The MSP430FR5989IRGCR can be programmed using C or assembly language. Texas Instruments provides an Integrated Development Environment (IDE) called Code Composer Studio, which supports these languages.

  6. Question: Are there any development boards available for the MSP430FR5989IRGCR?
    Answer: Yes, Texas Instruments offers development boards like the MSP-EXP430FR5994 LaunchPad, which provides an easy way to prototype and evaluate the MSP430FR5989IRGCR microcontroller.

  7. Question: Can the MSP430FR5989IRGCR communicate with other devices?
    Answer: Yes, the MSP430FR5989IRGCR has multiple communication interfaces like UART, SPI, and I2C, which allow it to communicate with other devices such as sensors, displays, and wireless modules.

  8. Question: Is the MSP430FR5989IRGCR suitable for real-time applications?
    Answer: Yes, the MSP430FR5989IRGCR has a built-in real-time clock (RTC) module and can be used in real-time applications that require accurate timekeeping or scheduling.

  9. Question: Can the MSP430FR5989IRGCR be used in industrial automation applications?
    Answer: Yes, the MSP430FR5989IRGCR is well-suited for industrial automation applications due to its low power consumption, robust peripherals, and support for various communication protocols.

  10. Question: Are there any online resources available for learning more about the MSP430FR5989IRGCR?
    Answer: Yes, Texas Instruments provides extensive documentation, application notes, and example code on their website. Additionally, there are online forums and communities where users can ask questions and share knowledge about the MSP430FR5989IRGCR.