Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MSP430FR6922IRGCT
자세히보기 데이터시트

MSP430FR6922IRGCT

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices
  • Characteristics:
    • Low power consumption
    • High performance
    • Integrated peripherals
    • Non-volatile memory
  • Package: QFN-64
  • Essence: Advanced microcontroller for low-power applications
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 16-bit RISC
  • CPU Speed: Up to 16 MHz
  • Flash Memory: 128 KB
  • RAM: 4 KB
  • Operating Voltage Range: 1.8V to 3.6V
  • ADC Resolution: 12-bit
  • Number of Pins: 64
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 16-bit TimerA, 16-bit TimerB
  • Analog Comparators: 2
  • Temperature Sensor: Yes
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MSP430FR6922IRGCT has a total of 64 pins. The pin configuration is as follows:

  • P1.x: General-purpose I/O pins
  • P2.x: General-purpose I/O pins
  • P3.x: General-purpose I/O pins
  • P4.x: General-purpose I/O pins
  • P5.x: General-purpose I/O pins
  • P6.x: General-purpose I/O pins
  • P7.x: General-purpose I/O pins
  • P8.x: General-purpose I/O pins
  • P9.x: General-purpose I/O pins
  • P10.x: General-purpose I/O pins
  • VCC: Power supply voltage
  • GND: Ground

Functional Features

  • Ultra-low power consumption in active and standby modes
  • Integrated FRAM (Ferroelectric Random Access Memory) for non-volatile data storage
  • Multiple communication interfaces for connectivity options
  • High-performance 16-bit RISC CPU
  • Integrated analog comparators for precise measurements
  • Temperature sensor for environmental monitoring
  • Flexible clock system with multiple oscillators
  • Enhanced security features for data protection

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices - Non-volatile FRAM memory eliminates the need for external EEPROM - Integrated peripherals reduce the need for additional components - Wide operating voltage range allows flexibility in power supply - High-performance CPU enables efficient execution of complex tasks

Disadvantages: - Limited flash memory capacity compared to some other microcontrollers - Higher cost compared to entry-level microcontrollers - Complex pin configuration may require careful planning during PCB design

Working Principles

The MSP430FR6922IRGCT operates based on a 16-bit RISC architecture. It utilizes low-power techniques to minimize energy consumption, making it suitable for battery-powered applications. The integrated FRAM memory provides fast and reliable non-volatile data storage, eliminating the need for external EEPROM.

The microcontroller can communicate with other devices through various interfaces such as UART, SPI, I2C, and USB. It also features analog comparators for precise measurements and a temperature sensor for environmental monitoring.

Detailed Application Field Plans

The MSP430FR6922IRGCT is widely used in various application fields, including:

  1. Internet of Things (IoT) devices: The low power consumption and integrated peripherals make it ideal for IoT applications such as smart home devices, wearables, and environmental sensors.
  2. Industrial automation: The microcontroller's high performance and communication interfaces enable seamless integration into industrial control systems, motor control, and monitoring equipment.
  3. Medical devices: The low power consumption and integrated analog comparators make it suitable for portable medical devices, patient monitoring systems, and diagnostic equipment.
  4. Energy management: The microcontroller's energy-efficient design is beneficial for applications such as smart meters, solar energy systems, and power monitoring devices.

Detailed and Complete Alternative Models

  1. MSP430FR5969IRGCT: Similar to the MSP430FR6922IRGCT but with a smaller flash memory capacity of 64 KB.
  2. MSP430FR6989IRGCT: Similar to the MSP430FR6922IRGCT but with a larger flash memory capacity of 256 KB.
  3. MSP430FR5994IRGCT: Similar to the MSP430FR6922IRGCT but with additional integrated peripherals such as an LCD controller and capacitive touch IOs.

These alternative models offer different flash memory capacities and additional features to cater to specific application requirements.

In conclusion, the MSP430FR6922IRGCT is an advanced microcontroller designed for low-power applications. Its high performance, integrated peripherals, and non-volatile FRAM memory make it suitable for various embedded systems and

기술 솔루션에 MSP430FR6922IRGCT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MSP430FR6922IRGCT in technical solutions:

  1. Q: What is MSP430FR6922IRGCT? A: MSP430FR6922IRGCT is a microcontroller from Texas Instruments' MSP430 family, specifically designed for low-power applications.

  2. Q: What are the key features of MSP430FR6922IRGCT? A: Some key features include ultra-low power consumption, integrated FRAM memory, multiple communication interfaces, and a wide range of peripherals.

  3. Q: What are the typical applications of MSP430FR6922IRGCT? A: MSP430FR6922IRGCT is commonly used in battery-powered devices, IoT applications, sensor networks, industrial control systems, and portable medical devices.

  4. Q: How much power does MSP430FR6922IRGCT consume? A: MSP430FR6922IRGCT is designed for ultra-low power consumption, with active mode currents as low as 100 µA/MHz and standby mode currents as low as 0.5 µA.

  5. Q: Can I program MSP430FR6922IRGCT using C/C++? A: Yes, MSP430FR6922IRGCT can be programmed using C/C++ languages. Texas Instruments provides an IDE called Code Composer Studio for development.

  6. Q: Does MSP430FR6922IRGCT support wireless communication? A: Yes, MSP430FR6922IRGCT supports various wireless communication protocols such as Bluetooth, Zigbee, and Sub-1 GHz RF.

  7. Q: How much memory does MSP430FR6922IRGCT have? A: MSP430FR6922IRGCT has 128 KB of FRAM (Ferroelectric RAM) memory, which offers fast read/write access and is non-volatile.

  8. Q: Can I interface MSP430FR6922IRGCT with external sensors? A: Yes, MSP430FR6922IRGCT has multiple built-in analog-to-digital converters (ADCs) and digital I/O pins that can be used to interface with external sensors.

  9. Q: Is MSP430FR6922IRGCT suitable for low-power IoT applications? A: Yes, MSP430FR6922IRGCT is an excellent choice for low-power IoT applications due to its ultra-low power consumption and integrated FRAM memory.

  10. Q: Where can I find technical documentation and support for MSP430FR6922IRGCT? A: You can find technical documentation, datasheets, application notes, and support resources on the Texas Instruments website or their official forums.