Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
OPA2363AIRSVR
자세히보기 데이터시트

OPA2363AIRSVR

Introduction

The OPA2363AIRSVR is a precision, low-power operational amplifier designed for a wide range of applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Operational Amplifier
  • Use: The OPA2363AIRSVR is commonly used in precision instrumentation, sensor signal conditioning, and audio processing applications.
  • Characteristics: It features low offset voltage, low quiescent current, and rail-to-rail input and output capabilities.
  • Package: The OPA2363AIRSVR is available in a small outline package (SOIC) with 8 pins.
  • Essence: Its essence lies in providing precise amplification with minimal power consumption.
  • Packaging/Quantity: The product is typically supplied in reels containing a specific quantity based on customer requirements.

Specifications

  • Supply Voltage: ±1.35V to ±18V
  • Input Offset Voltage: 150µV (max)
  • Quiescent Current: 160µA per channel (max)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 5V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The OPA2363AIRSVR has a standard 8-pin SOIC package with the following pin configuration: 1. OUT- 2. IN- 3. V- 4. V+ 5. NC 6. V- 7. IN+ 8. OUT+

Functional Features

  • Low Offset Voltage: Ensures accurate signal amplification.
  • Low Quiescent Current: Enables operation in battery-powered devices.
  • Rail-to-Rail Input and Output: Allows for maximum dynamic range in signal processing.

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Low power consumption
  • Wide operating voltage range

Disadvantages

  • Limited output current capability
  • Sensitive to electromagnetic interference in certain applications

Working Principles

The OPA2363AIRSVR operates by amplifying the difference between the input signals while maintaining high precision and low power consumption. It utilizes a combination of internal circuitry to achieve rail-to-rail input and output performance.

Detailed Application Field Plans

The OPA2363AIRSVR is well-suited for the following applications: - Precision sensor signal conditioning - Portable medical devices - Audio processing equipment - Battery-powered instrumentation

Detailed and Complete Alternative Models

Some alternative models to the OPA2363AIRSVR include: - OPA2365AIRSVR - OPA2364AIRSVR - OPA2376AIRSVR - OPA2374AIRSVR

In summary, the OPA2363AIRSVR is a precision operational amplifier with low power consumption and high accuracy, making it suitable for a wide range of applications in various industries.

Word Count: 410

기술 솔루션에 OPA2363AIRSVR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the OPA2363AIRSVR used for?

    • The OPA2363AIRSVR is a precision, low-power operational amplifier designed for use in a wide range of applications, including sensor signal conditioning, data acquisition systems, and portable instrumentation.

  2. What is the supply voltage range for the OPA2363AIRSVR?

    • The OPA2363AIRSVR has a supply voltage range of 1.8V to 5.5V, making it suitable for battery-powered and low-voltage applications.

  3. What is the typical input offset voltage of the OPA2363AIRSVR?

    • The typical input offset voltage of the OPA2363AIRSVR is 150µV, which ensures accurate signal processing in precision measurement applications.

  4. Can the OPA2363AIRSVR operate in single-supply configurations?

    • Yes, the OPA2363AIRSVR can operate in single-supply configurations, making it suitable for applications where only a positive voltage supply is available.

  5. What is the bandwidth of the OPA2363AIRSVR?

    • The OPA2363AIRSVR has a bandwidth of 1MHz, allowing for high-speed signal processing in various applications.

  6. Does the OPA2363AIRSVR have rail-to-rail input and output capabilities?

    • Yes, the OPA2363AIRSVR features rail-to-rail input and output, enabling it to handle signals close to both supply rails.

  7. What is the quiescent current consumption of the OPA2363AIRSVR?

    • The OPA2363AIRSVR has a low quiescent current consumption of 650µA, making it suitable for power-sensitive applications.

  8. Is the OPA2363AIRSVR available in a small package for space-constrained designs?

    • Yes, the OPA2363AIRSVR is available in a small SC70 package, making it suitable for compact and space-constrained designs.

  9. Can the OPA2363AIRSVR tolerate ESD events?

    • Yes, the OPA2363AIRSVR is designed to withstand ESD events up to 4kV, ensuring robustness in real-world operating conditions.

  10. What are some typical applications for the OPA2363AIRSVR?

    • Typical applications for the OPA2363AIRSVR include sensor interfaces, transducer amplifiers, precision integrators, and portable medical devices.