OPA2376AIDGKT
Product Overview
Category: Integrated Circuit (IC)
Use: Operational Amplifier
Characteristics: - Low offset voltage - Low input bias current - Rail-to-rail input and output - Wide supply voltage range - High open-loop gain
Package: MSOP-8
Essence: The OPA2376AIDGKT is a high-performance operational amplifier designed for precision applications.
Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage Range: ±1.8V to ±5.5V
- Input Offset Voltage: 150µV (max)
- Input Bias Current: 1pA (typ)
- Gain Bandwidth Product: 10MHz (typ)
- Slew Rate: 4V/µs (typ)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The OPA2376AIDGKT has the following pin configuration:
___________
OUT | 1 8 | V+
IN- | 2 7 | IN+
IN+ | 3 6 | V-
NC | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low offset voltage ensures accurate signal amplification.
- Low input bias current minimizes the impact of input loading.
- Rail-to-rail input and output capability allows for maximum dynamic range.
- Wide supply voltage range enables operation in various power supply configurations.
- High open-loop gain provides excellent linearity and stability.
Advantages and Disadvantages
Advantages: - High precision and accuracy - Wide operating temperature range - Small package size for space-constrained applications - Low power consumption
Disadvantages: - Limited output current capability - Not suitable for high-frequency applications
Working Principles
The OPA2376AIDGKT is an operational amplifier that amplifies the difference between its two input voltages. It utilizes a differential input stage followed by a gain stage to achieve high gain and accuracy. The rail-to-rail input and output capability allows the amplifier to operate with input and output signals that span the entire supply voltage range.
Detailed Application Field Plans
The OPA2376AIDGKT is commonly used in precision measurement equipment, data acquisition systems, medical devices, and audio applications. Its low offset voltage and low input bias current make it ideal for applications requiring accurate signal amplification and minimal loading effects.
Detailed and Complete Alternative Models
- OPA2376AIDGKR
- OPA2376AIDGKRG4
- OPA2376AIDGKTG4
- OPA2376AIDGKTT
- OPA2376AIDGKTTR
These alternative models offer similar performance characteristics and pin configurations, providing flexibility for different design requirements.
Word count: 285 words
기술 솔루션에 OPA2376AIDGKT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of OPA2376AIDGKT in technical solutions:
Q: What is the OPA2376AIDGKT? A: The OPA2376AIDGKT is a precision operational amplifier (op-amp) designed for various applications in technical solutions.
Q: What is the voltage supply range for the OPA2376AIDGKT? A: The OPA2376AIDGKT operates with a voltage supply range of ±2.25V to ±18V.
Q: What is the typical gain bandwidth product of the OPA2376AIDGKT? A: The OPA2376AIDGKT has a typical gain bandwidth product of 10 MHz.
Q: Can the OPA2376AIDGKT operate in single-supply configurations? A: Yes, the OPA2376AIDGKT can be used in both single-supply and dual-supply configurations.
Q: What is the input offset voltage of the OPA2376AIDGKT? A: The input offset voltage of the OPA2376AIDGKT is typically 500 µV.
Q: What is the input bias current of the OPA2376AIDGKT? A: The input bias current of the OPA2376AIDGKT is typically 1 nA.
Q: Can the OPA2376AIDGKT drive capacitive loads? A: Yes, the OPA2376AIDGKT is capable of driving capacitive loads up to 100 pF.
Q: What is the output voltage swing of the OPA2376AIDGKT? A: The output voltage swing of the OPA2376AIDGKT is typically within 10 mV of the supply rails.
Q: Is the OPA2376AIDGKT suitable for low-power applications? A: Yes, the OPA2376AIDGKT has a low quiescent current of typically 500 µA, making it suitable for low-power applications.
Q: What are some typical applications for the OPA2376AIDGKT? A: The OPA2376AIDGKT can be used in various applications such as precision instrumentation, data acquisition systems, audio amplifiers, and active filters.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.