OPA380AIDGKTG4
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics:
- High precision
- Low noise
- Wide bandwidth
- Rail-to-rail input and output
- Package: VSSOP-8
- Essence: The OPA380AIDGKTG4 is a high-performance operational amplifier designed for various applications requiring precision amplification.
- Packaging/Quantity: Available in reels of 2500 units.
Specifications
- Supply Voltage Range: ±1.5V to ±6V
- Input Offset Voltage: ±0.25mV (maximum)
- Input Bias Current: ±1nA (maximum)
- Gain Bandwidth Product: 10MHz
- Slew Rate: 7V/µs
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The OPA380AIDGKTG4 has the following pin configuration:
___________
OUT | 1 6 | V-
IN+ | 2 5 | V+
IN- | 3 4 | NC
|___________|
Functional Features
- High precision amplification
- Low noise operation
- Wide bandwidth for accurate signal reproduction
- Rail-to-rail input and output capability, allowing maximum dynamic range
Advantages and Disadvantages
Advantages: - High precision amplification ensures accurate signal processing. - Low noise operation minimizes signal distortion. - Wide bandwidth allows for faithful reproduction of signals across a broad frequency range. - Rail-to-rail input and output capability provides maximum dynamic range.
Disadvantages: - Limited supply voltage range compared to some other operational amplifiers. - Higher cost compared to lower-performance alternatives.
Working Principles
The OPA380AIDGKTG4 is based on a differential amplifier configuration, where the difference between the input voltages (IN+ and IN-) is amplified. The amplified output voltage is then available at the OUT pin. The operational amplifier operates in a closed-loop configuration, where external resistors and capacitors can be used to set the desired gain and frequency response.
Detailed Application Field Plans
The OPA380AIDGKTG4 is suitable for various applications that require precision amplification, such as: - Sensor signal conditioning - Medical instrumentation - Audio amplification - Data acquisition systems - Test and measurement equipment
Detailed and Complete Alternative Models
- OPA381AIDGKTG4: Similar performance with additional shutdown feature.
- OPA382AIDGKTG4: Dual operational amplifier with similar characteristics.
- OPA383AIDGKTG4: Quad operational amplifier with similar characteristics.
These alternative models provide flexibility in choosing the right operational amplifier based on specific application requirements.
Word count: 316 words
기술 솔루션에 OPA380AIDGKTG4 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of OPA380AIDGKTG4 in technical solutions:
Q: What is the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 is a high-speed, low-power operational amplifier (op-amp) designed for various applications in technical solutions.
Q: What is the supply voltage range for the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 operates with a supply voltage range of 2.7V to 5.5V.
Q: What is the typical gain bandwidth product (GBW) of the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 has a typical GBW of 50 MHz.
Q: Can the OPA380AIDGKTG4 be used in single-supply applications? A: Yes, the OPA380AIDGKTG4 can be used in both single-supply and split-supply applications.
Q: What is the input voltage range of the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 has an input voltage range that extends from the negative supply rail to within 1.5V of the positive supply rail.
Q: Does the OPA380AIDGKTG4 have rail-to-rail output capability? A: Yes, the OPA380AIDGKTG4 has rail-to-rail output swing capability.
Q: What is the quiescent current consumption of the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 has a low quiescent current consumption of 1.2 mA.
Q: Can the OPA380AIDGKTG4 drive capacitive loads? A: Yes, the OPA380AIDGKTG4 is capable of driving capacitive loads up to 100 pF.
Q: What is the temperature range for the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 can operate within a temperature range of -40°C to +125°C.
Q: What are some typical applications for the OPA380AIDGKTG4? A: The OPA380AIDGKTG4 is commonly used in audio amplification, active filters, data acquisition systems, and other precision signal conditioning applications.
Please note that these answers are based on general information about the OPA380AIDGKTG4 and may vary depending on specific use cases and requirements.