Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
OPA4330AIDR
자세히보기 데이터시트

OPA4330AIDR

Product Overview

The OPA4330AIDR belongs to the category of operational amplifiers (op-amps) and is commonly used in various electronic circuits. This op-amp is known for its high precision, low noise, and wide bandwidth, making it suitable for applications in instrumentation, audio equipment, and sensor signal conditioning. The OPA4330AIDR comes in a small outline package (SOIC) with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: ±2.25V to ±18V
  • Input Offset Voltage: 150µV (max)
  • Gain Bandwidth Product: 50MHz
  • Slew Rate: 20V/µs
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The OPA4330AIDR has a standard pin configuration with 8 pins in a dual in-line package (DIP). The pinout is as follows: 1. V+ 2. Inverting Input (-) 3. Non-inverting Input (+) 4. V- 5. Output 6. NC (Not Connected) 7. NC 8. NC

Functional Features

  • High precision and low offset voltage
  • Wide bandwidth for accurate signal processing
  • Low noise for sensitive applications
  • Rail-to-rail input and output operation

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Versatile application in various electronic circuits
  • Low noise for sensitive signal conditioning

Disadvantages

  • Limited supply voltage range compared to some other op-amps
  • Higher cost compared to standard op-amps

Working Principles

The OPA4330AIDR operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its inverting and non-inverting inputs while maintaining stability and linearity across a wide frequency range.

Application Field Plans

The OPA4330AIDR finds extensive use in the following application fields: - Instrumentation amplifiers for precise measurement equipment - Audio amplifiers for high-fidelity sound reproduction - Sensor signal conditioning for accurate sensor interfacing

Alternative Models

For users seeking alternative op-amp models, the following options can be considered: - OPA4350AIDR: Similar performance with enhanced rail-to-rail capabilities - LM324: Standard general-purpose op-amp with lower cost - AD8628ARZ: Precision op-amp with ultra-low offset voltage

This comprehensive entry provides an in-depth understanding of the OPA4330AIDR, covering its specifications, features, applications, and alternatives within the specified word count.

기술 솔루션에 OPA4330AIDR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the OPA4330AIDR?

    • The OPA4330AIDR is a low-power, precision operational amplifier designed for a wide range of applications in technical solutions.

  2. What is the typical supply voltage range for the OPA4330AIDR?

    • The typical supply voltage range for the OPA4330AIDR is from 2.7V to 5.5V.

  3. What are the key features of the OPA4330AIDR?

    • The key features of the OPA4330AIDR include low offset voltage, low noise, low quiescent current, and rail-to-rail output swing.

  4. In what applications can the OPA4330AIDR be used?

    • The OPA4330AIDR can be used in applications such as sensor signal conditioning, precision instrumentation, and battery-powered systems.

  5. What is the input offset voltage of the OPA4330AIDR?

    • The input offset voltage of the OPA4330AIDR is typically 150µV.

  6. What is the input bias current of the OPA4330AIDR?

    • The input bias current of the OPA4330AIDR is typically 1pA.

  7. What is the gain bandwidth product of the OPA4330AIDR?

    • The gain bandwidth product of the OPA4330AIDR is typically 10MHz.

  8. Does the OPA4330AIDR have thermal shutdown protection?

    • No, the OPA4330AIDR does not have thermal shutdown protection.

  9. Can the OPA4330AIDR operate with a single power supply?

    • Yes, the OPA4330AIDR can operate with a single power supply.

  10. What is the temperature range for the OPA4330AIDR?

    • The OPA4330AIDR has an extended industrial temperature range of -40°C to 125°C.