OPA843IDBVTG4

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Operational Amplifier
• Characteristics:
  • High-speed, low-power voltage feedback amplifier
  • Rail-to-rail input and output
  • Wide bandwidth: 1.8 GHz
  • Low distortion: -82 dBc at 10 MHz
• Package: SOT-23-5
• Essence: High-performance operational amplifier
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage Range: 2.7 V to 5.5 V
• Input Offset Voltage: ±1 mV (maximum)
• Input Bias Current: ±1 µA (maximum)
• Output Current: ±40 mA (maximum)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The OPA843IDBVTG4 has a total of 5 pins arranged as follows:

```

---

| | --| IN- OUT |-- --| IN+ V- |-- --| V+ NC |-- --| GND NC |-- |___________| ```

Pin Description: - IN-: Inverting input - OUT: Output - IN+: Non-inverting input - V-: Negative power supply - V+: Positive power supply - GND: Ground - NC: No connection

Functional Features

• High-speed operation: The OPA843IDBVTG4 offers a wide bandwidth of 1.8 GHz, making it suitable for high-frequency applications.
• Low power consumption: This operational amplifier is designed to operate with low power supply voltages, ranging from 2.7 V to 5.5 V.
• Rail-to-rail input and output: The OPA843IDBVTG4 supports input and output signals that can swing close to the power supply rails, maximizing dynamic range.
• Low distortion: With a low distortion level of -82 dBc at 10 MHz, this amplifier ensures accurate signal reproduction.

Advantages and Disadvantages

Advantages: - High-speed performance - Low power consumption - Wide bandwidth - Rail-to-rail operation - Low distortion

Disadvantages: - Limited supply voltage range (2.7 V to 5.5 V) - SOT-23-5 package may not be suitable for all applications

Working Principles

The OPA843IDBVTG4 is an operational amplifier that amplifies the difference between its inverting and non-inverting inputs. It operates by using a combination of transistors and resistors to provide high gain and accurate signal amplification. The rail-to-rail input and output capability allows the amplifier to handle signals that span the entire range of the power supply voltages.

Detailed Application Field Plans

The OPA843IDBVTG4 is commonly used in various applications, including:

1. Communication Systems:

   • High-frequency signal amplification
   • RF front-end circuits
   • Baseband processing

2. Test and Measurement Equipment:

   • Signal conditioning
   • Data acquisition systems
   • Instrumentation amplifiers

3. Audio Systems:

   • Audio signal amplification
   • Headphone amplifiers
   • Line drivers

4. Industrial Control Systems:

   • Sensor signal conditioning
   • Process control
   • Motor control

Detailed and Complete Alternative Models

1. OPA844IDBVTG4: Similar to OPA843IDBVTG4 but with higher bandwidth (2.5 GHz) and lower distortion (-85 dBc at 10 MHz).
2. OPA842IDBVTG4: Similar to OPA843IDBVTG4 but with lower bandwidth (1.5 GHz) and lower power consumption.
3. OPA844IDRBTG4: Similar to OPA844IDBVTG4 but in a different package (SOIC-8).

These alternative models provide options with varying specifications to suit different application requirements.

Word count: 455 words