SN74CBTR16861DGGR
Product Overview
Category
SN74CBTR16861DGGR belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used for signal switching and routing applications in various electronic devices.
Characteristics
- High-speed operation
- Low power consumption
- Wide operating voltage range
- Multiple input/output options
- Compact package size
Package
SN74CBTR16861DGGR is available in a small form factor package, typically a 56-ball VFBGA (Very Fine Pitch Ball Grid Array) package.
Essence
The essence of SN74CBTR16861DGGR lies in its ability to efficiently switch and route signals within electronic circuits, ensuring reliable and accurate data transmission.
Packaging/Quantity
SN74CBTR16861DGGR is usually packaged in reels or trays, with a typical quantity of 2500 units per reel/tray.
Specifications
- Supply Voltage: 1.65V to 3.6V
- Operating Temperature Range: -40°C to +85°C
- Input/Output Compatibility: LVTTL/TTL
- Number of Channels: 20
- Switching Speed: <5ns
Detailed Pin Configuration
The pin configuration of SN74CBTR16861DGGR is as follows:
Pin 1: GND
Pin 2: A0
Pin 3: A1
...
Pin 56: VCC
Functional Features
- Bidirectional signal switching
- Low ON-state resistance
- ESD protection on all pins
- Hot insertion capability
- Power-off high-impedance I/O ports
Advantages and Disadvantages
Advantages
- High-speed operation allows for efficient data transmission.
- Low power consumption helps conserve energy in electronic devices.
- Wide operating voltage range ensures compatibility with various systems.
- Compact package size enables space-saving designs.
Disadvantages
- Limited number of channels may restrict the complexity of signal routing.
- Higher cost compared to simpler switching components.
Working Principles
SN74CBTR16861DGGR operates based on CMOS (Complementary Metal-Oxide-Semiconductor) technology. It utilizes a combination of transistors and logic gates to control the flow of signals between input and output channels.
Detailed Application Field Plans
SN74CBTR16861DGGR finds applications in various electronic systems, including but not limited to: - Data communication devices - Networking equipment - Test and measurement instruments - Industrial automation systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to SN74CBTR16861DGGR are: - SN74CBT3257CDBQR - SN74CBTLV3126PWR - SN74CB3Q16211DLR
These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable IC for specific applications.
In conclusion, SN74CBTR16861DGGR is a high-performance integrated circuit designed for signal switching and routing applications. Its compact size, low power consumption, and wide operating voltage range make it a versatile choice for various electronic systems. While it has some limitations in terms of channel count, there are alternative models available to cater to different requirements.
기술 솔루션에 SN74CBTR16861DGGR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of SN74CBTR16861DGGR:
Q: What is SN74CBTR16861DGGR? A: SN74CBTR16861DGGR is a specific integrated circuit (IC) manufactured by Texas Instruments. It is a 20-bit bus switch with 3-state outputs, designed for high-speed digital applications.
Q: What is the purpose of SN74CBTR16861DGGR? A: The purpose of SN74CBTR16861DGGR is to provide bidirectional voltage translation between different voltage domains in a system, allowing communication between devices operating at different voltage levels.
Q: What voltage levels does SN74CBTR16861DGGR support? A: SN74CBTR16861DGGR supports voltage translation between two voltage domains, typically between 1.2V and 3.6V.
Q: How many channels does SN74CBTR16861DGGR have? A: SN74CBTR16861DGGR has 20 channels, allowing it to translate signals on up to 20 different lines.
Q: What is the maximum data rate supported by SN74CBTR16861DGGR? A: SN74CBTR16861DGGR supports high-speed data rates up to 400 Mbps, making it suitable for various high-performance applications.
Q: Can SN74CBTR16861DGGR be used as a level shifter? A: Yes, SN74CBTR16861DGGR can be used as a level shifter to convert signals between different voltage levels, ensuring compatibility between devices operating at different voltages.
Q: Is SN74CBTR16861DGGR compatible with I2C and SPI interfaces? A: Yes, SN74CBTR16861DGGR is compatible with I2C and SPI interfaces, making it suitable for voltage translation in systems utilizing these communication protocols.
Q: Does SN74CBTR16861DGGR have built-in ESD protection? A: Yes, SN74CBTR16861DGGR incorporates built-in ESD protection, providing robustness against electrostatic discharge events.
Q: Can SN74CBTR16861DGGR be used in battery-powered applications? A: Yes, SN74CBTR16861DGGR can be used in battery-powered applications as it operates at low power consumption levels, making it suitable for portable devices.
Q: Are there any application notes or reference designs available for SN74CBTR16861DGGR? A: Yes, Texas Instruments provides application notes and reference designs that offer guidance on using SN74CBTR16861DGGR in various technical solutions. These resources can help users understand the best practices and implementation details.