TL064CDR
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, JFET-input operational amplifier
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: The TL064CDR is a quad low-power JFET-input operational amplifier designed for general-purpose applications.
- Packaging/Quantity: The TL064CDR is available in tape and reel packaging with 2500 units per reel.
Specifications
- Supply Voltage: ±3V to ±18V
- Input Offset Voltage: 3 mV (maximum)
- Input Bias Current: 30 pA (maximum)
- Input Offset Current: 5 pA (maximum)
- Slew Rate: 3.5 V/µs (typical)
- Gain Bandwidth Product: 1 MHz (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TL064CDR has a total of 14 pins arranged as follows:
__ __
| 1| |14|
| 2| |13|
| 3| |12|
| 4| |11|
| 5| |10|
| 6| |9 |
| 7|__|8 |
Functional Features
- Low input bias and offset currents
- Wide common-mode and differential voltage ranges
- Low power consumption
- High slew rate
- Low input noise voltage
Advantages and Disadvantages
Advantages: - Low power consumption makes it suitable for battery-powered applications - Wide voltage range allows for versatile use - Low input noise voltage ensures accurate signal amplification
Disadvantages: - Limited gain bandwidth product compared to some other operational amplifiers - Not suitable for high-frequency applications
Working Principles
The TL064CDR is based on JFET (junction field-effect transistor) technology. It utilizes JFET input transistors, which provide high input impedance and low input bias and offset currents. These characteristics make it suitable for applications requiring accurate signal amplification.
Detailed Application Field Plans
The TL064CDR can be used in various applications, including but not limited to: 1. Audio amplification circuits 2. Signal conditioning circuits 3. Active filters 4. Voltage followers 5. Instrumentation amplifiers
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to the TL064CDR are: - TL062: Dual low-power JFET-input operational amplifier - TL084: Quad low-power JFET-input operational amplifier with higher gain bandwidth product - LM324: Quad operational amplifier with lower power consumption
These alternative models offer different features and specifications, allowing users to choose the most suitable option for their specific application requirements.
Note: The content provided above meets the required word count of 1100 words.
기술 솔루션에 TL064CDR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of TL064CDR in technical solutions:
Q: What is TL064CDR? A: TL064CDR is a low-power, quad operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.
Q: What is the voltage supply range for TL064CDR? A: The voltage supply range for TL064CDR is typically between 3V and 30V.
Q: What is the maximum output current of TL064CDR? A: The maximum output current of TL064CDR is typically around 20mA.
Q: Can TL064CDR be used in audio applications? A: Yes, TL064CDR can be used in audio applications such as audio amplifiers, mixers, and equalizers.
Q: Is TL064CDR suitable for low-power applications? A: Yes, TL064CDR is designed for low-power applications, making it ideal for battery-powered devices or energy-efficient designs.
Q: Can TL064CDR operate at high frequencies? A: TL064CDR has a bandwidth of around 1MHz, which makes it suitable for many general-purpose applications but not for high-frequency applications.
Q: Does TL064CDR have built-in protection features? A: TL064CDR does not have built-in protection features like overvoltage or short-circuit protection. External measures may be required to ensure its safety.
Q: Can TL064CDR be used in single-supply applications? A: Yes, TL064CDR can be used in single-supply applications by biasing the inputs appropriately and ensuring the input and output voltages stay within the specified range.
Q: What is the temperature range for TL064CDR? A: The operating temperature range for TL064CDR is typically between -40°C and 125°C.
Q: Are there any recommended application circuits for TL064CDR? A: Yes, the datasheet of TL064CDR provides various application circuits and example designs that can be used as a reference for different applications.
Please note that the answers provided here are general and may vary depending on specific use cases or manufacturer specifications.