Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TLV2464CDR
자세히보기 데이터시트

TLV2464CDR

Product Overview

The TLV2464CDR belongs to the category of operational amplifiers (op-amps) and is commonly used in various electronic circuits. This device is known for its high precision, low noise, and low power consumption, making it suitable for a wide range of applications. The TLV2464CDR comes in a small outline package (SOIC) and is available in tape and reel packaging.

Basic Information

  • Category: Operational Amplifier
  • Use: Signal conditioning, filtering, amplification
  • Characteristics: High precision, low noise, low power consumption
  • Package: Small Outline Package (SOIC)
  • Packaging/Quantity: Tape and Reel

Specifications

  • Supply Voltage: ±2.5 V to ±18 V
  • Input Offset Voltage: 300 µV (max)
  • Gain Bandwidth Product: 2.8 MHz
  • Slew Rate: 0.6 V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLV2464CDR has a standard pin configuration with four pins: 1. Pin 1 (OUT1): Output 1 2. Pin 2 (-IN1): Inverting Input 1 3. Pin 3 (+IN1): Non-inverting Input 1 4. Pin 4 (VCC+): Positive Supply Voltage

Functional Features

  • Low input bias current
  • Rail-to-rail output swing
  • Low noise performance
  • Wide supply voltage range

Advantages and Disadvantages

Advantages

  • High precision
  • Low power consumption
  • Wide operating temperature range

Disadvantages

  • Limited gain bandwidth product
  • Sensitive to electromagnetic interference

Working Principles

The TLV2464CDR operates as a differential amplifier, amplifying the difference between the non-inverting and inverting inputs. It utilizes internal circuitry to achieve high precision and low noise performance while maintaining low power consumption.

Detailed Application Field Plans

The TLV2464CDR is commonly used in the following applications: - Sensor signal conditioning - Active filters - Instrumentation amplifiers - Data acquisition systems

Detailed and Complete Alternative Models

Some alternative models to the TLV2464CDR include: - LM324 - AD822

In conclusion, the TLV2464CDR is a versatile operational amplifier known for its high precision and low power consumption, making it suitable for a wide range of electronic applications.

Word count: 366

기술 솔루션에 TLV2464CDR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the TLV2464CDR?

    • The TLV2464CDR is a low-power, rail-to-rail input/output operational amplifier designed for applications requiring both precision and low power consumption.

  2. What is the supply voltage range for TLV2464CDR?

    • The supply voltage range for TLV2464CDR is typically between 2.7V and 6V.

  3. What are the typical applications of TLV2464CDR?

    • The TLV2464CDR is commonly used in battery-powered systems, sensor interfaces, and portable instrumentation due to its low power consumption and precision characteristics.

  4. What is the input offset voltage of TLV2464CDR?

    • The input offset voltage of TLV2464CDR is typically around 500µV.

  5. What is the input bias current of TLV2464CDR?

    • The input bias current of TLV2464CDR is typically around 1pA.

  6. What is the bandwidth of TLV2464CDR?

    • The bandwidth of TLV2464CDR is typically around 1MHz.

  7. Can TLV2464CDR be used in single-supply applications?

    • Yes, TLV2464CDR can be used in single-supply applications due to its rail-to-rail input/output capability.

  8. What is the temperature range for TLV2464CDR?

    • TLV2464CDR is designed to operate over a wide temperature range, typically from -40°C to 125°C.

  9. Does TLV2464CDR have built-in EMI filtering?

    • No, TLV2464CDR does not have built-in EMI filtering.

  10. Is TLV2464CDR suitable for precision analog signal processing?

    • Yes, TLV2464CDR is suitable for precision analog signal processing due to its low offset voltage and low noise characteristics.