Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TLV2474AIPWRG4
자세히보기 데이터시트

TLV2474AIPWRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
  • Package: TSSOP-14
  • Essence: TLV2474AIPWRG4 is a low-power quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1.5mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2474AIPWRG4 has a TSSOP-14 package with the following pin configuration:

___________ VCC --| |-- OUT A IN B --| |-- OUT B IN A --| |-- OUT C GND --| |-- OUT D |___________|

Functional Features

  • Low-power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail input/output allows for maximum dynamic range.
  • Quad operational amplifier provides multiple amplification channels in a single package.
  • Wide supply voltage range enables compatibility with various power sources.
  • High gain bandwidth product and slew rate ensure accurate signal reproduction.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life. - Rail-to-rail input/output allows for maximum signal swing. - Quad package saves board space and reduces component count. - Wide supply voltage range enhances versatility.

Disadvantages: - Limited gain bandwidth product compared to specialized amplifiers. - Higher input offset voltage than precision operational amplifiers.

Working Principles

The TLV2474AIPWRG4 is based on a differential amplifier configuration. It utilizes a combination of transistors, resistors, and capacitors to amplify and process analog signals. The rail-to-rail input/output capability ensures that the amplifier can handle signals close to the power supply rails, maximizing the dynamic range. The low-power design minimizes energy consumption, making it suitable for portable and battery-powered applications.

Detailed Application Field Plans

The TLV2474AIPWRG4 is commonly used in various applications, including:

  1. Audio Amplification: The low-power consumption and rail-to-rail operation make it ideal for audio amplification in portable devices such as smartphones and MP3 players.
  2. Sensor Signal Conditioning: The quad package allows for simultaneous conditioning of multiple sensor signals, making it suitable for applications like temperature measurement, pressure sensing, and light detection.
  3. Industrial Control Systems: The wide supply voltage range and robust performance make it suitable for use in industrial control systems, such as motor control, process control, and instrumentation.

Detailed and Complete Alternative Models

  1. LM324: A widely used quad operational amplifier with similar specifications and pin configuration.
  2. MCP6004: Low-power quad operational amplifier with rail-to-rail input/output and extended temperature range.
  3. AD8629: Precision quad operational amplifier with low input offset voltage and high gain bandwidth product.

These alternative models offer similar functionality and can be considered as substitutes for the TLV2474AIPWRG4 depending on specific application requirements.

Word Count: 474

기술 솔루션에 TLV2474AIPWRG4 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is TLV2474AIPWRG4?
    Answer: TLV2474AIPWRG4 is a quad operational amplifier (op-amp) that is commonly used in various technical solutions.

  2. Question: What is the supply voltage range for TLV2474AIPWRG4?
    Answer: The supply voltage range for TLV2474AIPWRG4 is typically between 2.7V and 36V.

  3. Question: What is the input offset voltage of TLV2474AIPWRG4?
    Answer: The input offset voltage of TLV2474AIPWRG4 is typically around 1mV.

  4. Question: What is the gain bandwidth product of TLV2474AIPWRG4?
    Answer: The gain bandwidth product of TLV2474AIPWRG4 is typically around 10MHz.

  5. Question: Can TLV2474AIPWRG4 be used in single-supply applications?
    Answer: Yes, TLV2474AIPWRG4 can be used in both single-supply and dual-supply applications.

  6. Question: What is the common-mode rejection ratio (CMRR) of TLV2474AIPWRG4?
    Answer: The CMRR of TLV2474AIPWRG4 is typically around 100dB.

  7. Question: Is TLV2474AIPWRG4 suitable for precision applications?
    Answer: Yes, TLV2474AIPWRG4 is suitable for precision applications due to its low input offset voltage and high CMRR.

  8. Question: What is the operating temperature range for TLV2474AIPWRG4?
    Answer: The operating temperature range for TLV2474AIPWRG4 is typically between -40°C and 125°C.

  9. Question: Can TLV2474AIPWRG4 be used in audio applications?
    Answer: Yes, TLV2474AIPWRG4 can be used in audio applications due to its wide bandwidth and low distortion.

  10. Question: Is TLV2474AIPWRG4 available in a surface mount package?
    Answer: Yes, TLV2474AIPWRG4 is available in a surface mount package (TSSOP-14).