Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TLV9004IPWR
자세히보기 데이터시트

TLV9004IPWR

Product Overview

Category

TLV9004IPWR belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in electronic circuits for amplifying and processing analog signals.

Characteristics

  • Low power consumption
  • High gain bandwidth product
  • Rail-to-rail input and output
  • Wide supply voltage range

Package

TLV9004IPWR is available in a small-sized package known as TSSOP-14.

Essence

The essence of TLV9004IPWR lies in its ability to provide high-performance amplification and signal conditioning in various applications.

Packaging/Quantity

TLV9004IPWR is typically packaged in reels, with 2500 units per reel.

Specifications

  • Supply Voltage Range: 1.8V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 6V/µs
  • Input Bias Current: ±1pA (maximum)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. OUT1: Output 1
  2. IN1-: Inverting Input 1
  3. IN1+: Non-Inverting Input 1
  4. VCC: Positive Power Supply
  5. IN2+: Non-Inverting Input 2
  6. IN2-: Inverting Input 2
  7. OUT2: Output 2
  8. NC: No Connection
  9. GND: Ground
  10. NC: No Connection
  11. IN3-: Inverting Input 3
  12. IN3+: Non-Inverting Input 3
  13. OUT3: Output 3
  14. NC: No Connection

Functional Features

  • Low input offset voltage
  • High open-loop gain
  • Rail-to-rail input and output capability
  • Low power consumption
  • Stable operation over a wide temperature range

Advantages and Disadvantages

Advantages

  • Wide supply voltage range allows for versatile applications
  • Rail-to-rail input and output enables maximum signal swing
  • Low power consumption prolongs battery life in portable devices
  • Stable operation in extreme temperature conditions

Disadvantages

  • Limited number of channels (3 channels)
  • Relatively higher input offset voltage compared to some alternatives

Working Principles

TLV9004IPWR operates based on the principles of operational amplifiers. It amplifies the difference between its two input voltages and produces an output voltage that is proportional to this difference.

Detailed Application Field Plans

TLV9004IPWR finds applications in various fields, including but not limited to: 1. Portable audio devices 2. Sensor signal conditioning 3. Battery-powered instrumentation 4. Industrial automation 5. Medical equipment

Detailed and Complete Alternative Models

Some alternative models to TLV9004IPWR are: 1. LM324 2. MCP6004 3. AD8603 4. MAX44246 5. OPA2340

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 407 words

기술 솔루션에 TLV9004IPWR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of TLV9004IPWR in technical solutions:

  1. Q: What is TLV9004IPWR? A: TLV9004IPWR is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for various applications.

  2. Q: What is the supply voltage range for TLV9004IPWR? A: The supply voltage range for TLV9004IPWR is typically between 1.8V and 5.5V.

  3. Q: What is the typical quiescent current consumption of TLV9004IPWR? A: The typical quiescent current consumption of TLV9004IPWR is around 600µA.

  4. Q: Can TLV9004IPWR operate with a single power supply? A: Yes, TLV9004IPWR can operate with a single power supply, making it suitable for battery-powered applications.

  5. Q: What is the input voltage range of TLV9004IPWR? A: The input voltage range of TLV9004IPWR extends from the negative supply voltage to the positive supply voltage.

  6. Q: What is the output voltage swing of TLV9004IPWR? A: The output voltage swing of TLV9004IPWR is typically within a few millivolts of the supply rails.

  7. Q: Can TLV9004IPWR drive capacitive loads? A: Yes, TLV9004IPWR can drive capacitive loads up to 100pF without any external compensation.

  8. Q: Is TLV9004IPWR suitable for precision applications? A: TLV9004IPWR is not specifically designed for precision applications, but it offers good performance in many general-purpose applications.

  9. Q: What is the operating temperature range of TLV9004IPWR? A: The operating temperature range of TLV9004IPWR is typically between -40°C and 125°C.

  10. Q: Can TLV9004IPWR be used in audio applications? A: Yes, TLV9004IPWR can be used in audio applications such as headphone amplifiers or audio signal conditioning circuits.

Please note that these answers are general and may vary depending on specific application requirements.