Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TPS60402QDBVRQ1
자세히보기 데이터시트

TPS60402QDBVRQ1

Introduction

The TPS60402QDBVRQ1 is a voltage regulator belonging to the category of DC/DC switching regulators. This device is commonly used to generate a regulated output voltage from an unregulated input voltage, making it suitable for various applications. The TPS60402QDBVRQ1 exhibits specific characteristics, comes in a small package, and offers distinct advantages and disadvantages.

Basic Information Overview

  • Category: DC/DC Switching Regulator
  • Use: Generating regulated output voltage
  • Characteristics: Small form factor, high efficiency, low quiescent current
  • Package: SOT-23 (DBV)
  • Essence: Voltage regulation
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 1.8V to 5.5V
  • Output Voltage Range: 1.8V to 5.5V
  • Output Current: Up to 60mA
  • Switching Frequency: 1.6MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TPS60402QDBVRQ1 features the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. SW (Switch Node) 5. FB (Feedback)

Functional Features

  • High Efficiency: The TPS60402QDBVRQ1 operates with high efficiency, minimizing power loss.
  • Low Quiescent Current: It exhibits low quiescent current, suitable for battery-powered applications.
  • Integrated Protection: Overcurrent and thermal shutdown protection enhance reliability.

Advantages and Disadvantages

Advantages

  • Small form factor
  • High efficiency
  • Integrated protection features

Disadvantages

  • Limited output current capacity
  • Higher cost compared to linear regulators

Working Principles

The TPS60402QDBVRQ1 utilizes a synchronous rectification architecture to achieve high efficiency. When enabled, the internal control circuitry regulates the output voltage by adjusting the duty cycle of the internal switch.

Detailed Application Field Plans

The TPS60402QDBVRQ1 finds application in various fields, including: - Portable electronic devices - Battery-powered systems - Sensor modules - Wearable devices

Detailed and Complete Alternative Models

Some alternative models to the TPS60402QDBVRQ1 include: - TPS60403DBVRQ1 - TPS60404DBVRQ1 - TPS60405DBVRQ1

In conclusion, the TPS60402QDBVRQ1 serves as a versatile DC/DC switching regulator with specific characteristics and functional features. Its application spans across diverse fields, offering efficient voltage regulation in compact form factors.

[Word Count: 366]

기술 솔루션에 TPS60402QDBVRQ1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the TPS60402QDBVRQ1 and what does it do?

    • The TPS60402QDBVRQ1 is a low-power, high-efficiency charge pump DC/DC converter designed for applications requiring a regulated negative output voltage.

  2. What is the input voltage range of the TPS60402QDBVRQ1?

    • The input voltage range of the TPS60402QDBVRQ1 is 1.8V to 5.5V.

  3. What is the typical output current capability of the TPS60402QDBVRQ1?

    • The TPS60402QDBVRQ1 has a typical output current capability of 60mA.

  4. What are the typical applications for the TPS60402QDBVRQ1?

    • Typical applications for the TPS60402QDBVRQ1 include portable devices, sensor interfaces, and bias voltage generation.

  5. What is the efficiency of the TPS60402QDBVRQ1?

    • The TPS60402QDBVRQ1 has a high efficiency of up to 90%.

  6. Does the TPS60402QDBVRQ1 have built-in overcurrent protection?

    • Yes, the TPS60402QDBVRQ1 features built-in overcurrent protection to safeguard the device and the load.

  7. What is the operating temperature range of the TPS60402QDBVRQ1?

    • The TPS60402QDBVRQ1 has an operating temperature range of -40°C to 85°C.

  8. Is the TPS60402QDBVRQ1 suitable for battery-powered applications?

    • Yes, the TPS60402QDBVRQ1 is suitable for battery-powered applications due to its low power consumption and high efficiency.

  9. Can the TPS60402QDBVRQ1 be used in automotive applications?

    • Yes, the TPS60402QDBVRQ1 is qualified for automotive applications, making it suitable for use in automotive electronics.

  10. Does the TPS60402QDBVRQ1 require external components for operation?

    • The TPS60402QDBVRQ1 requires only a few external components, making it easy to integrate into technical solutions.