Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6108C18AGR-G
자세히보기 데이터시트

XC6108C18AGR-G

Product Overview

Category

XC6108C18AGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stable output
  • Low power consumption

Package

XC6108C18AGR-G comes in a small surface-mount package.

Essence

The essence of XC6108C18AGR-G is to provide a stable output voltage for electronic devices.

Packaging/Quantity

XC6108C18AGR-G is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)

Detailed Pin Configuration

XC6108C18AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation within a specified range
  • Low dropout voltage for efficient operation
  • Low quiescent current for power-saving applications
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • Stable output voltage
  • Low power consumption
  • Small package size
  • Overcurrent and thermal protection

Disadvantages

  • Limited output current capacity (150mA)

Working Principles

XC6108C18AGR-G works by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a constant output voltage, regardless of changes in the input voltage or load conditions. This ensures a stable power supply for connected electronic devices.

Detailed Application Field Plans

XC6108C18AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C18AGR-G are: - LM1117-1.8 - MCP1700-1802E/TO - AP2112K-1.8TRG1 - TS9011SCX-1.8

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 270 words

기술 솔루션에 XC6108C18AGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6108C18AGR-G in technical solutions:

  1. Question: What is XC6108C18AGR-G?
    - Answer: XC6108C18AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108C18AGR-G?
    - Answer: The operating voltage range of XC6108C18AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108C18AGR-G help in technical solutions?
    - Answer: XC6108C18AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption or malfunction.

  4. Question: What is the output type of XC6108C18AGR-G?
    - Answer: XC6108C18AGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6108C18AGR-G?
    - Answer: The typical reset threshold voltage of XC6108C18AGR-G is 1.8V.

  6. Question: Can XC6108C18AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108C18AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6108C18AGR-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6108C18AGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: What is the package type of XC6108C18AGR-G?
    - Answer: XC6108C18AGR-G is available in a SOT-25 package, which is a small surface-mount package with three pins.

  9. Question: Can XC6108C18AGR-G be used in automotive applications?
    - Answer: Yes, XC6108C18AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  10. Question: Is XC6108C18AGR-G RoHS compliant?
    - Answer: Yes, XC6108C18AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C18AGR-G.