Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6108C31AGR-G
자세히보기 데이터시트

XC6108C31AGR-G

Product Overview

Category

XC6108C31AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108C31AGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C31AGR-G lies in its ability to provide stable voltage output for various electronic applications.

Packaging/Quantity

XC6108C31AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.1V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C31AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C31AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6108C31AGR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6108C31AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C31AGR-G are: - LM317T - LT1086 - LM1117-3.3 - MCP1700-3302E/TO

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 346 words

기술 솔루션에 XC6108C31AGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6108C31AGR-G in technical solutions:

  1. Question: What is XC6108C31AGR-G?
    - Answer: XC6108C31AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108C31AGR-G?
    - Answer: The operating voltage range of XC6108C31AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108C31AGR-G help in technical solutions?
    - Answer: XC6108C31AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6108C31AGR-G?
    - Answer: XC6108C31AGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6108C31AGR-G?
    - Answer: The typical reset threshold voltage of XC6108C31AGR-G is 3.1V.

  6. Question: Can XC6108C31AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108C31AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6108C31AGR-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6108C31AGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6108C31AGR-G be used in automotive applications?
    - Answer: Yes, XC6108C31AGR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

  9. Question: What is the package type of XC6108C31AGR-G?
    - Answer: XC6108C31AGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Is XC6108C31AGR-G RoHS compliant?
    - Answer: Yes, XC6108C31AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C31AGR-G.