XC6108C33AGR-G
Product Overview
Category
XC6108C33AGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the output voltage.
Characteristics
- Voltage regulation: XC6108C33AGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: It consumes minimal power during standby mode.
- Thermal shutdown protection: It prevents overheating and damage to the device.
- Short-circuit protection: It safeguards against short-circuit conditions.
Package
XC6108C33AGR-G is available in a small surface-mount package.
Essence
The essence of XC6108C33AGR-G lies in its ability to provide a regulated and stable output voltage for electronic circuits.
Packaging/Quantity
XC6108C33AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.3V
- Dropout voltage: 200mV (typical)
- Quiescent current: 30μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6108C33AGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6108C33AGR-G maintains a constant output voltage regardless of variations in the input voltage.
- Low dropout voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
- Low quiescent current: During standby mode, the device consumes minimal power, making it suitable for battery-powered applications.
- Thermal shutdown protection: It includes a built-in mechanism to prevent overheating and protect the device from damage.
- Short-circuit protection: XC6108C33AGR-G safeguards against short-circuit conditions, ensuring the safety of the circuit.
Advantages and Disadvantages
Advantages
- Stable output voltage regulation
- Low dropout voltage
- Low quiescent current consumption
- Thermal shutdown protection
- Short-circuit protection
Disadvantages
- Limited input voltage range (2.5V - 6.0V)
- Relatively small package size may require additional precautions during soldering and handling.
Working Principles
XC6108C33AGR-G utilizes internal circuitry to regulate the output voltage. It compares the feedback voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage. The device continuously monitors the input voltage, providing efficient regulation even when the input voltage is close to the desired output voltage.
Detailed Application Field Plans
XC6108C33AGR-G finds application in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C33AGR-G are: - LM1117-3.3 - MCP1703-3302E/DB - AP2112K-3.3TRG1 - NCP1117ST33T3G
These models offer similar functionality and specifications, providing options for different design requirements.
Word count: 442 words
기술 솔루션에 XC6108C33AGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of XC6108C33AGR-G in technical solutions:
Q: What is XC6108C33AGR-G? A: XC6108C33AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C33AGR-G? A: The operating voltage range of XC6108C33AGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C33AGR-G help in technical solutions? A: XC6108C33AGR-G helps in technical solutions by ensuring proper functioning of electronic devices by monitoring the power supply voltage and providing a reset signal if it falls below a specified level.
Q: Can XC6108C33AGR-G be used in battery-powered applications? A: Yes, XC6108C33AGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: What is the output type of XC6108C33AGR-G? A: XC6108C33AGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset threshold voltage of XC6108C33AGR-G? A: The typical reset threshold voltage of XC6108C33AGR-G is 3.3V, but it can be customized for specific applications.
Q: Does XC6108C33AGR-G have any built-in delay time for the reset signal? A: Yes, XC6108C33AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6108C33AGR-G be used in automotive applications? A: Yes, XC6108C33AGR-G is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.
Q: Is XC6108C33AGR-G available in different package options? A: Yes, XC6108C33AGR-G is available in various package options, such as SOT-25 and USP-4B, to accommodate different design requirements.
Q: Where can I find more information about XC6108C33AGR-G? A: You can find more detailed information about XC6108C33AGR-G in the datasheet provided by the manufacturer or by contacting their technical support team.