XC6108N33AGR-G
Product Overview
Category
XC6108N33AGR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.3V
- Maximum Output Current: 150mA
- Low Dropout Voltage: 200mV (typical)
- Low Quiescent Current: 1μA (typical)
- High Ripple Rejection Ratio: 70dB (typical)
- Thermal Shutdown Protection
- Short Circuit Protection
Package
XC6108N33AGR-G is available in a small SOT-25 package.
Essence
The essence of XC6108N33AGR-G is to provide a stable and regulated output voltage for various electronic devices.
Packaging/Quantity
XC6108N33AGR-G is typically packaged in reels containing 3000 units.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.3V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 1μA (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +85°C
- Package: SOT-25
Detailed Pin Configuration
XC6108N33AGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6108N33AGR-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
- Low dropout voltage: The regulator maintains a low voltage drop across the device, minimizing power loss.
- Low quiescent current: The device consumes minimal current when in standby mode, conserving power.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
- Short circuit protection: XC6108N33AGR-G safeguards against short circuits, preventing potential damage to the circuit.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Low dropout voltage minimizes power dissipation.
- Low quiescent current ensures energy efficiency.
- Thermal shutdown protection prevents overheating.
- Short circuit protection enhances circuit safety.
Disadvantages
- Limited output current capacity (up to 150mA).
- SOT-25 package may require additional space on the PCB.
Working Principles
XC6108N33AGR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to achieve the desired output. By regulating the voltage, it ensures stable operation of electronic devices connected to its output.
Detailed Application Field Plans
XC6108N33AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Communication modules
Detailed and Complete Alternative Models
Some alternative models to XC6108N33AGR-G include: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar functionality and can be used as alternatives depending on specific requirements and availability.
Word count: 411
기술 솔루션에 XC6108N33AGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of XC6108N33AGR-G in technical solutions:
Q: What is XC6108N33AGR-G? A: XC6108N33AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108N33AGR-G? A: The operating voltage range of XC6108N33AGR-G is typically between 0.9V and 6.0V.
Q: What is the purpose of using XC6108N33AGR-G in a technical solution? A: XC6108N33AGR-G is commonly used to ensure proper system operation by monitoring the power supply voltage and initiating a reset if the voltage falls below a specified level.
Q: How does XC6108N33AGR-G detect the power supply voltage? A: XC6108N33AGR-G uses an internal voltage reference and a comparator to monitor the power supply voltage.
Q: Can XC6108N33AGR-G be used in battery-powered applications? A: Yes, XC6108N33AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6108N33AGR-G? A: XC6108N33AGR-G has an open-drain output, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset voltage threshold of XC6108N33AGR-G? A: The typical reset voltage threshold of XC6108N33AGR-G is 3.3V, but it can be customized for specific applications.
Q: Can XC6108N33AGR-G be used in automotive applications? A: Yes, XC6108N33AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6108N33AGR-G have any built-in delay time for the reset signal? A: Yes, XC6108N33AGR-G has a built-in fixed delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6108N33AGR-G available in different package options? A: Yes, XC6108N33AGR-G is available in various package options, such as SOT-25 and USP-4B, to accommodate different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.