1N5234C-TR

Product Overview

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

Zener voltage: 6.2V
Power dissipation: 500mW
Operating temperature range: -65°C to +200°C

Package

The 1N5234C-TR is typically available in a DO-35 package.

Essence

This Zener diode is essential for maintaining a constant voltage across a load in a circuit.

Packaging/Quantity

It is usually packaged in reels with a quantity of 3000 units per reel.

Specifications

Zener voltage: 6.2V
Power dissipation: 500mW
Maximum forward voltage: 1.1V
Reverse current: 5μA
Operating temperature range: -65°C to +200°C

Detailed Pin Configuration

The 1N5234C-TR has two pins, anode, and cathode, which are denoted by the markings on the diode.

Functional Features

Voltage regulation: The 1N5234C-TR maintains a constant voltage across a load.
Overvoltage protection: It prevents damage to sensitive components by diverting excess voltage.

Advantages

Precise voltage regulation
Compact size
Wide operating temperature range

Disadvantages

Limited power dissipation capability
Sensitive to temperature variations

Working Principles

The 1N5234C-TR operates based on the Zener effect, where it allows current to flow in reverse when the voltage reaches the Zener voltage, effectively regulating the voltage across the load.

Detailed Application Field Plans

The 1N5234C-TR is widely used in: - Voltage regulators - Power supplies - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5234C-TR include: - 1N5221B-TR - 1N5229B-TR - 1N5243B-TR

In conclusion, the 1N5234C-TR Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and wide operating temperature range make it suitable for various applications in the electronics industry.

[Word count: 346]

기술 솔루션에 1N5234C-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is the 1N5234C-TR?
- The 1N5234C-TR is a Zener diode with a voltage rating of 6.2V and a power rating of 500mW.
What are the typical applications of the 1N5234C-TR?
- It is commonly used for voltage regulation, voltage reference, and overvoltage protection in various electronic circuits.
What is the maximum current that can flow through the 1N5234C-TR?
- The maximum current for the 1N5234C-TR is typically around 20mA.
How does the 1N5234C-TR provide voltage regulation?
- The Zener diode conducts current in reverse-bias at its breakdown voltage, providing a relatively constant voltage across its terminals.
Can the 1N5234C-TR be used for overvoltage protection?
- Yes, it can be used to shunt excess voltage away from sensitive components in a circuit, protecting them from damage.
What are the key specifications to consider when using the 1N5234C-TR in a design?
- Key specifications include the breakdown voltage, power rating, and maximum current, as well as the temperature coefficient and package type.
Are there any specific layout considerations when incorporating the 1N5234C-TR into a PCB design?
- It's important to minimize trace lengths and keep the Zener diode close to the components it is protecting or regulating.
What are the potential failure modes of the 1N5234C-TR?
- Common failure modes include exceeding the maximum power dissipation, exceeding the maximum current, or exposure to excessive voltage transients.
Can multiple 1N5234C-TR diodes be connected in series or parallel?
- Yes, they can be connected in series to create higher breakdown voltages or in parallel to share current.
Are there any alternative components that can be used in place of the 1N5234C-TR?
- Yes, other Zener diodes with similar breakdown voltages and power ratings can be used as alternatives in certain applications.