Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BYG24D-M3/TR
자세히보기 데이터시트

BYG24D-M3/TR

Introduction

The BYG24D-M3/TR belongs to the category of semiconductor products and is commonly used as a rectifier diode in various electronic applications. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor product
  • Use: Rectifier diode
  • Characteristics: High efficiency, low forward voltage drop
  • Package: SOD-123FL
  • Essence: Efficient rectification of alternating current to direct current
  • Packaging/Quantity: Tape and reel packaging, quantity varies based on supplier

Specifications

  • Voltage Rating: 200V
  • Current Rating: 1A
  • Forward Voltage Drop: 0.7V
  • Reverse Recovery Time: 50ns
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BYG24D-M3/TR has a standard SOD-123FL package with two pins. Pin 1 is the cathode (K) and pin 2 is the anode (A).

Functional Features

  • Efficient rectification of AC to DC
  • Low forward voltage drop for reduced power loss
  • Fast reverse recovery time for improved performance

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low forward voltage drop
  • Fast reverse recovery time

Disadvantages

  • Limited voltage and current ratings compared to higher power diodes
  • Sensitive to temperature variations

Working Principles

The BYG24D-M3/TR operates based on the principle of rectification, allowing the flow of current in one direction while blocking it in the opposite direction. When subjected to an AC input, the diode conducts during the positive half-cycle, allowing current to flow through, and blocks during the negative half-cycle, preventing current flow.

Detailed Application Field Plans

The BYG24D-M3/TR is commonly used in the following applications: - Power supplies - LED lighting - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

  • BYG22D-M3/TR: Similar characteristics with lower voltage rating
  • BYG25D-M3/TR: Higher voltage and current ratings for more demanding applications
  • BYG26D-M3/TR: Enhanced thermal performance for high-temperature environments

In conclusion, the BYG24D-M3/TR is a reliable rectifier diode with efficient performance and suitable for various electronic applications.

[Word count: 346]

기술 솔루션에 BYG24D-M3/TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum forward current rating of BYG24D-M3/TR?

    • The maximum forward current rating of BYG24D-M3/TR is 2A.

  2. What is the reverse voltage rating of BYG24D-M3/TR?

    • The reverse voltage rating of BYG24D-M3/TR is 40V.

  3. What is the package type of BYG24D-M3/TR?

    • BYG24D-M3/TR comes in a surface mount SMB package.

  4. What are the typical applications for BYG24D-M3/TR?

    • BYG24D-M3/TR is commonly used in DC-DC converters, LED lighting, and power supplies.

  5. What is the operating temperature range of BYG24D-M3/TR?

    • The operating temperature range of BYG24D-M3/TR is -65°C to +150°C.

  6. Does BYG24D-M3/TR have a low leakage current?

    • Yes, BYG24D-M3/TR has a low leakage current which makes it suitable for high efficiency applications.

  7. Is BYG24D-M3/TR RoHS compliant?

    • Yes, BYG24D-M3/TR is RoHS compliant, making it environmentally friendly.

  8. Can BYG24D-M3/TR be used in automotive applications?

    • Yes, BYG24D-M3/TR is suitable for automotive applications due to its robust design and performance.

  9. What is the reverse recovery time of BYG24D-M3/TR?

    • The reverse recovery time of BYG24D-M3/TR is typically 50ns.

  10. Does BYG24D-M3/TR require a heat sink for operation?

    • BYG24D-M3/TR has a low thermal resistance and may not require a heat sink for many applications, but it's recommended to consult the datasheet for specific designs.