BYM10-200-E3/96

Product Overview

Use

It is used as a rectifier diode in electronic circuits.

Characteristics

High current capability
Low forward voltage drop
Fast switching speed

Package

The BYM10-200-E3/96 is typically available in a small, surface-mount package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in various electronic applications.

Packaging/Quantity

The diode is usually packaged in reels or tubes and is available in quantities suitable for production runs.

Specifications

Maximum repetitive peak reverse voltage: 200V
Average forward current: 1A
Forward voltage drop: 1V
Reverse recovery time: 35ns

Detailed Pin Configuration

The BYM10-200-E3/96 has a standard SOD-123 package with two pins. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

Efficient rectification of AC to DC
Fast response time
Low power dissipation

Advantages

High current capability
Low forward voltage drop
Compact size

Disadvantages

Limited maximum reverse voltage
Moderate reverse recovery time

Working Principles

The BYM10-200-E3/96 operates on the principle of unidirectional conduction, allowing current to flow in only one direction when a forward bias is applied.

Detailed Application Field Plans

This diode is commonly used in power supplies, battery chargers, and voltage regulators. It is also employed in various consumer electronics and automotive applications.

Detailed and Complete Alternative Models

1N400x series
UF400x series
FR107

In conclusion, the BYM10-200-E3/96 is a versatile rectifier diode with high current capability and fast switching speed. Its compact size and efficient performance make it suitable for a wide range of electronic applications.

[Word count: 287]

기술 솔루션에 BYM10-200-E3/96 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is the BYM10-200-E3/96 component used for in technical solutions?
- The BYM10-200-E3/96 is a rectifier diode commonly used in power supply and voltage regulation circuits.
What are the key specifications of the BYM10-200-E3/96?
- The BYM10-200-E3/96 is a 200V, 1A rectifier diode with an E3/96 package.
Can the BYM10-200-E3/96 be used in high-frequency applications?
- Yes, the BYM10-200-E3/96 is suitable for high-frequency applications due to its fast switching characteristics.
What are the typical applications of the BYM10-200-E3/96 in technical solutions?
- The BYM10-200-E3/96 is commonly used in power supplies, battery chargers, inverters, and voltage regulators.
Does the BYM10-200-E3/96 require a heatsink for operation?
- It is recommended to use a heatsink when operating the BYM10-200-E3/96 at higher currents or in elevated temperature environments.
What is the maximum forward voltage drop of the BYM10-200-E3/96?
- The maximum forward voltage drop of the BYM10-200-E3/96 is typically around 1.1V at the rated current.
Is the BYM10-200-E3/96 suitable for automotive applications?
- Yes, the BYM10-200-E3/96 can be used in automotive electronics such as voltage regulators and power management systems.
What are the storage and operating temperature ranges for the BYM10-200-E3/96?
- The BYM10-200-E3/96 has a storage temperature range of -65°C to 175°C and an operating temperature range of -65°C to 150°C.
Does the BYM10-200-E3/96 have reverse recovery characteristics?
- Yes, the BYM10-200-E3/96 exhibits fast reverse recovery times, making it suitable for high-efficiency applications.
Are there any common failure modes associated with the BYM10-200-E3/96?
- Common failure modes include thermal overstress, excessive reverse voltage, and excessive forward current, so proper circuit protection is important for reliable operation.