BZD27C6V2P-HE3-08
Introduction
The BZD27C6V2P-HE3-08 is a specialized electronic component designed for specific applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulation and Protection
- Characteristics: High Efficiency, Low Power Dissipation
- Package: SOD-123FL
- Essence: Zener Diode
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Voltage: 6.2V
- Power Dissipation: 1W
- Operating Temperature: -65°C to +150°C
- Forward Voltage: 1.5V
- Reverse Current: 5µA
Detailed Pin Configuration
The BZD27C6V2P-HE3-08 has a standard SOD-123FL package with two pins. Pin 1 is the cathode, and pin 2 is the anode.
Functional Features
- Voltage Regulation: Provides stable 6.2V output under varying load conditions.
- Overvoltage Protection: Safeguards connected circuits from voltage spikes.
- Low Power Dissipation: Minimizes heat generation during operation.
Advantages and Disadvantages
Advantages
- Precise Voltage Regulation
- Compact Size
- Low Reverse Current
Disadvantages
- Limited Power Dissipation Capacity
- Sensitive to Overcurrent Conditions
Working Principles
The BZD27C6V2P-HE3-08 operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased. This allows it to regulate voltage and protect downstream components from excessive voltage.
Detailed Application Field Plans
The BZD27C6V2P-HE3-08 is suitable for various applications, including: - Voltage Regulation in Power Supplies - Overvoltage Protection in Consumer Electronics - Signal Clipping in Audio Circuits
Detailed and Complete Alternative Models
- BZX84C6V2: Similar Zener diode with SOT-23 package
- BZT52C6V2S: Zener diode with higher power dissipation capability
In conclusion, the BZD27C6V2P-HE3-08 is a reliable and efficient Zener diode that offers precise voltage regulation and overvoltage protection in a compact package. Its characteristics make it suitable for a wide range of applications, and it has alternative models available for specific requirements.
[Word Count: 366]
기술 솔루션에 BZD27C6V2P-HE3-08 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is BZD27C6V2P-HE3-08?
- BZD27C6V2P-HE3-08 is a high-efficiency, low VF Schottky diode designed for use in various technical solutions.
What are the key features of BZD27C6V2P-HE3-08?
- The key features include low forward voltage drop, high current capability, and high surge current capability.
In what technical solutions can BZD27C6V2P-HE3-08 be used?
- BZD27C6V2P-HE3-08 can be used in power supplies, voltage regulators, and DC-DC converters.
What is the maximum forward voltage drop of BZD27C6V2P-HE3-08?
- The maximum forward voltage drop is typically around 0.36V at a forward current of 2A.
What is the maximum reverse voltage of BZD27C6V2P-HE3-08?
- The maximum reverse voltage is 60V.
What is the typical junction capacitance of BZD27C6V2P-HE3-08?
- The typical junction capacitance is around 200pF at a reverse bias of 1V.
Is BZD27C6V2P-HE3-08 suitable for high-frequency applications?
- Yes, BZD27C6V2P-HE3-08 is suitable for high-frequency applications due to its low junction capacitance.
Does BZD27C6V2P-HE3-08 have a small form factor?
- Yes, BZD27C6V2P-HE3-08 is available in a small SOD-123 package, making it suitable for space-constrained designs.
What is the operating temperature range of BZD27C6V2P-HE3-08?
- The operating temperature range is typically -65°C to +150°C.
Are there any recommended application circuits for BZD27C6V2P-HE3-08?
- Yes, the datasheet for BZD27C6V2P-HE3-08 provides recommended application circuits for various technical solutions.