Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BZM55C2V4-TR3
자세히보기 데이터시트

BZM55C2V4-TR3: Product Overview and Analysis

Introduction

The BZM55C2V4-TR3 is a crucial component in the field of electronic devices, offering a wide range of applications and functionalities. This entry provides an in-depth analysis of the product, covering its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Voltage Regulator
  • Characteristics: Small form factor, high precision, low dropout voltage
  • Package: SOT-23
  • Essence: Regulating voltage for electronic circuits
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage Output: 2.4V
  • Maximum Input Voltage: 5.5V
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.2% typical
  • Load Regulation: 1% typical

Detailed Pin Configuration

The BZM55C2V4-TR3 follows the standard SOT-23 pin configuration: 1. Input 2. Ground 3. Output

Functional Features

  • Voltage Regulation: Provides a stable 2.4V output voltage.
  • Low Dropout Voltage: Ensures efficient operation even with small input-output differentials.
  • Temperature Stability: Maintains consistent performance across a wide temperature range.

Advantages and Disadvantages

Advantages

  • Small form factor enables integration into compact designs.
  • High precision ensures accurate voltage regulation.
  • Low dropout voltage enhances efficiency.

Disadvantages

  • Limited maximum input voltage may not be suitable for high voltage applications.
  • SOT-23 package may require careful handling during assembly.

Working Principles

The BZM55C2V4-TR3 operates by comparing the output voltage to a reference voltage and adjusting the current flow through the regulator to maintain a stable output voltage of 2.4V.

Detailed Application Field Plans

The BZM55C2V4-TR3 finds extensive use in various electronic devices, including: - Portable consumer electronics - Battery-powered devices - Embedded systems - IoT devices

Detailed and Complete Alternative Models

  • BZX84C2V4: Similar SOT-23 packaged voltage regulator with 2.4V output.
  • LM2937-2.5: TO-220 packaged voltage regulator with 2.5V output.

In conclusion, the BZM55C2V4-TR3 serves as a vital component in electronic circuits, providing precise voltage regulation in a compact form factor. Its characteristics, specifications, and functional features make it well-suited for a diverse range of applications, despite some limitations in maximum input voltage. Understanding its role and alternatives can aid in optimizing circuit designs and selecting the most suitable components for specific requirements.

Word Count: 464

기술 솔루션에 BZM55C2V4-TR3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the BZM55C2V4-TR3 component used for in technical solutions?

    • The BZM55C2V4-TR3 is a Zener diode designed to provide voltage regulation and protection in various electronic circuits.

  2. What is the maximum power dissipation of the BZM55C2V4-TR3?

    • The maximum power dissipation of the BZM55C2V4-TR3 is typically around 500mW.

  3. What is the voltage rating of the BZM55C2V4-TR3?

    • The BZM55C2V4-TR3 has a nominal voltage rating of 2.4V, making it suitable for applications requiring precise voltage regulation at this level.

  4. In what type of applications is the BZM55C2V4-TR3 commonly used?

    • The BZM55C2V4-TR3 is commonly used in voltage reference, voltage clamping, and voltage regulation applications in various electronic devices and circuits.

  5. What are the typical operating temperature ranges for the BZM55C2V4-TR3?

    • The BZM55C2V4-TR3 is designed to operate within a temperature range of -65°C to +150°C, making it suitable for a wide range of environmental conditions.

  6. Does the BZM55C2V4-TR3 require any external components for proper operation?

    • The BZM55C2V4-TR3 typically does not require any external components for basic voltage regulation and protection functions.

  7. What are the key electrical characteristics of the BZM55C2V4-TR3?

    • The key electrical characteristics of the BZM55C2V4-TR3 include its zener voltage, reverse leakage current, and dynamic impedance.

  8. Can the BZM55C2V4-TR3 be used in automotive applications?

    • Yes, the BZM55C2V4-TR3 is often used in automotive electronics for voltage regulation and protection purposes.

  9. Are there any specific soldering or mounting considerations for the BZM55C2V4-TR3?

    • The BZM55C2V4-TR3 should be handled and mounted according to standard industry practices for surface mount components.

  10. Where can I find detailed specifications and application notes for the BZM55C2V4-TR3?

    • Detailed specifications and application notes for the BZM55C2V4-TR3 can typically be found in the manufacturer's datasheet and application guides, which are available on their website or through authorized distributors.