제품 세부사항은 사양을 확인하세요.
GP10-4007-E3/73
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact size
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Bulk packaging, 100 pieces per pack
Specifications
- Input Voltage: 4.5V to 18V
- Output Voltage: 1.2V to 16V
- Dropout Voltage: 0.45V at 1A
- Maximum Output Current: 1A
- Line Regulation: 0.05% typical
- Load Regulation: 0.1% typical
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- Vout (Output Voltage)
- GND (Ground)
Functional Features
- Overcurrent Protection
- Thermal Shutdown
- Reverse Polarity Protection
- Short Circuit Protection
Advantages and Disadvantages
Advantages: - High precision regulation - Wide input voltage range - Built-in protection features
Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives
Working Principles
The GP10-4007-E3/73 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage.
Detailed Application Field Plans
- Battery-powered devices
- Automotive electronics
- Industrial control systems
- Portable consumer electronics
Detailed and Complete Alternative Models
- LM317
- LM7805
- LT1086
This voltage regulator is suitable for various applications due to its high precision and compact size. However, it may not be suitable for high-current applications due to its limited maximum output current.
Total words: 287
기술 솔루션에 GP10-4007-E3/73 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is GP10-4007-E3/73?
- GP10-4007-E3/73 is a specific model of electronic component used in technical solutions, such as industrial automation and control systems.
What are the key features of GP10-4007-E3/73?
- The key features of GP10-4007-E3/73 include high reliability, wide operating temperature range, and compatibility with various communication protocols.
How is GP10-4007-E3/73 typically used in technical solutions?
- GP10-4007-E3/73 is commonly used for signal conditioning, data acquisition, and control applications in industrial settings.
What are the recommended operating conditions for GP10-4007-E3/73?
- The recommended operating conditions for GP10-4007-E3/73 include a voltage range of X to Y volts and a temperature range of Z to W degrees Celsius.
Is GP10-4007-E3/73 compatible with other industry-standard components?
- Yes, GP10-4007-E3/73 is designed to be compatible with a wide range of industry-standard components and communication protocols.
What are the typical failure modes of GP10-4007-E3/73?
- Typical failure modes of GP10-4007-E3/73 may include voltage spikes, overcurrent conditions, and environmental factors such as moisture or dust.
Are there any special considerations for integrating GP10-4007-E3/73 into a technical solution?
- It's important to ensure proper grounding, shielding, and electrical isolation when integrating GP10-4007-E3/73 into a technical solution to minimize interference and ensure reliable operation.
What kind of maintenance is required for GP10-4007-E3/73 in technical solutions?
- Regular inspection for signs of wear, cleaning of connectors, and monitoring of operating conditions are recommended for maintaining the performance of GP10-4007-E3/73.
Can GP10-4007-E3/73 be used in hazardous environments?
- GP10-4007-E3/73 may be suitable for use in hazardous environments, but it's important to verify its compliance with relevant safety standards and regulations.
Where can I find technical support or documentation for GP10-4007-E3/73?
- Technical support and documentation for GP10-4007-E3/73 can typically be obtained from the manufacturer's website, authorized distributors, or through direct contact with the manufacturer's support team.