Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
GP10ME-E3/73
자세히보기 데이터시트

GP10ME-E3/73

Product Overview

Category

The GP10ME-E3/73 belongs to the category of semiconductor diodes.

Use

It is commonly used in rectification and voltage regulation applications.

Characteristics

  • Forward Voltage: 1V
  • Reverse Current: 5µA
  • Maximum Operating Temperature: 150°C
  • Package Type: DO-214AC (SMA)

Package

The GP10ME-E3/73 is typically available in reels or tubes, with varying quantities based on manufacturer specifications.

Essence

This diode serves as a crucial component in electronic circuits for converting alternating current (AC) to direct current (DC).

Specifications

  • Maximum Reverse Voltage: 1000V
  • Average Rectified Current: 1A
  • Peak Surge Current: 30A
  • Reverse Recovery Time: 35ns

Detailed Pin Configuration

The GP10ME-E3/73 has two pins, anode, and cathode, which are identified by the marking on the body of the diode.

Functional Features

  • High reverse voltage capability
  • Low forward voltage drop
  • Fast reverse recovery time

Advantages

  • Efficient rectification of high voltage AC signals
  • Compact package size
  • Low power dissipation

Disadvantages

  • Limited maximum current handling capacity
  • Sensitive to temperature variations

Working Principles

The GP10ME-E3/73 operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the opposite direction.

Detailed Application Field Plans

  • Power supply units
  • Voltage regulators
  • Inverters
  • Battery chargers

Detailed and Complete Alternative Models

  • 1N4007
  • UF4007
  • FR107
  • 1N5408

In conclusion, the GP10ME-E3/73 semiconductor diode is a vital component in electronic circuits, providing efficient rectification and voltage regulation capabilities. Its compact size and high reverse voltage capability make it suitable for various applications in power electronics and electrical systems.

[Word count: 296]

기술 솔루션에 GP10ME-E3/73 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the GP10ME-E3/73 used for in technical solutions?

    • The GP10ME-E3/73 is a general-purpose PNP transistor commonly used for amplification and switching applications in various technical solutions.

  2. What are the key specifications of the GP10ME-E3/73?

    • The GP10ME-E3/73 features a maximum collector current of 1A, a collector-emitter voltage of 40V, and a power dissipation of 625mW.

  3. How is the GP10ME-E3/73 typically utilized in amplifier circuits?

    • In amplifier circuits, the GP10ME-E3/73 can be used as a small-signal amplifier to amplify weak signals or as a driver stage for larger transistors.

  4. Can the GP10ME-E3/73 be used for switching applications?

    • Yes, the GP10ME-E3/73 can be employed in switching applications to control the flow of current in electronic devices and circuits.

  5. What are the recommended operating conditions for the GP10ME-E3/73?

    • It is advisable to operate the GP10ME-E3/73 within a temperature range of -55°C to 150°C and to ensure that the maximum ratings for current and voltage are not exceeded.

  6. Are there any specific considerations for circuit design when using the GP10ME-E3/73?

    • When designing circuits with the GP10ME-E3/73, attention should be given to proper biasing, thermal management, and ensuring adequate voltage and current handling capabilities.

  7. What are some common alternatives to the GP10ME-E3/73 for similar technical applications?

    • Alternatives to the GP10ME-E3/73 include transistors such as BC557, 2N3906, and 2N4403, which may offer similar characteristics for specific applications.

  8. Can the GP10ME-E3/73 be used in low-power or high-frequency applications?

    • The GP10ME-E3/73 is suitable for low-power applications but may not be ideal for high-frequency operations due to its transition frequency and capacitance characteristics.

  9. How can the GP10ME-E3/73 be protected from potential damage in circuits?

    • To protect the GP10ME-E3/73, it is important to incorporate appropriate current-limiting resistors, flyback diodes in switching applications, and ensure proper heat sinking for thermal management.

  10. Where can I find detailed application notes and reference designs for using the GP10ME-E3/73 in technical solutions?

    • Detailed application notes and reference designs for the GP10ME-E3/73 can often be found in the manufacturer's datasheets, application guides, and technical support resources. Additionally, online electronics forums and communities may provide valuable insights and examples of practical implementations.