Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
P4SMA510AHE3_A/I
자세히보기 데이터시트

P4SMA510AHE3_A/I

Introduction

The P4SMA510AHE3A/I is a diode belonging to the category of transient voltage suppressors (TVS). It is commonly used for protecting sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the P4SMA510AHE3A/I diode.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage transients induced by lightning, ESD, and other transient voltage events
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SMA (DO-214AC)
  • Essence: Silicon TVS Diode
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

  • Part Number: P4SMA510AHE3_A/I
  • Peak Pulse Power: 400W
  • Breakdown Voltage: 510V
  • Operating Voltage: 436V
  • Clamping Voltage: 658V
  • Peak Pulse Current: 10A
  • Reverse Standoff Voltage: 436V
  • Operating Temperature Range: -55°C to +150°C
  • Storage Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The P4SMA510AHE3_A/I diode has a standard SMA (DO-214AC) package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time to transient voltage events
  • Low clamping voltage to protect downstream components
  • High surge current capability for robust protection

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Low clamping voltage
  • Robust surge current capability

Disadvantages

  • Sensitive to reverse overvoltage conditions
  • Requires proper circuit design for optimal performance

Working Principles

The P4SMA510AHE3_A/I operates based on the principle of avalanche breakdown. When a transient voltage event occurs, the diode rapidly conducts, diverting the excess energy away from the protected circuit. This action limits the voltage across the protected circuit to a safe level, thereby preventing damage to sensitive components.

Detailed Application Field Plans

The P4SMA510AHE3_A/I diode finds extensive use in various applications, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics - Power supplies - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to the P4SMA510AHE3A/I diode include: - P4SMA6.8AHE3A/I - P4SMA7.5AHE3A/I - P4SMA8.2AHE3A/I - P4SMA9.1AHE3A/I - P4SMA10AHE3A/I

In summary, the P4SMA510AHE3_A/I diode is a crucial component for protecting electronic circuits from transient voltage events. Its fast response time, low clamping voltage, and high surge current capability make it an essential part of many electronic systems.

Word count: 498

기술 솔루션에 P4SMA510AHE3_A/I 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum peak pulse power of P4SMA510AHE3_A/I?

    • The maximum peak pulse power of P4SMA510AHE3_A/I is 400 Watts.

  2. What is the breakdown voltage of P4SMA510AHE3_A/I?

    • The breakdown voltage of P4SMA510AHE3_A/I is 570V.

  3. What is the operating temperature range for P4SMA510AHE3_A/I?

    • P4SMA510AHE3_A/I has an operating temperature range of -55°C to +150°C.

  4. What are the typical applications for P4SMA510AHE3_A/I?

    • P4SMA510AHE3_A/I is commonly used in surge protection for sensitive electronics, such as in telecommunications equipment, industrial control systems, and automotive electronics.

  5. What is the response time of P4SMA510AHE3_A/I?

    • The response time of P4SMA510AHE3_A/I is very fast, typically responding within nanoseconds to protect against transient voltage events.

  6. Does P4SMA510AHE3_A/I meet any specific industry standards?

    • Yes, P4SMA510AHE3_A/I complies with the industry standard requirements for surge protection devices.

  7. Can P4SMA510AHE3_A/I be used in outdoor applications?

    • Yes, P4SMA510AHE3_A/I is suitable for outdoor applications due to its robust construction and wide operating temperature range.

  8. What is the packaging type available for P4SMA510AHE3_A/I?

    • P4SMA510AHE3_A/I is available in a variety of packaging options, including tape and reel for automated assembly.

  9. Is P4SMA510AHE3_A/I RoHS compliant?

    • Yes, P4SMA510AHE3_A/I is RoHS compliant, making it suitable for use in environmentally conscious designs.

  10. What are the key features that make P4SMA510AHE3_A/I suitable for technical solutions?

    • P4SMA510AHE3_A/I offers high power handling capability, fast response time, and reliability, making it ideal for protecting sensitive electronic components from transient voltage events in various technical solutions.