Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SS12P2LHM3_A/I
자세히보기 데이터시트

SS12P2LHM3_A/I

Product Overview

  • Category: Electronic Component
  • Use: Rectifier Diode
  • Characteristics: High efficiency, low forward voltage drop
  • Package: SOD-123FL
  • Essence: Semiconductor diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage: 0.7V
  • Reverse Voltage: 100V
  • Average Rectified Current: 1A
  • Peak Surge Current: 30A
  • Operating Temperature Range: -65°C to +150°C

Detailed Pin Configuration

The SS12P2LHM3_A/I follows the standard SOD-123FL pin configuration with the anode connected to pin 1 and the cathode connected to pin 2.

Functional Features

  • Efficient rectification of AC to DC
  • Low forward voltage drop for reduced power loss
  • Fast switching speed for improved performance

Advantages and Disadvantages

Advantages: - High efficiency - Compact package size - Suitable for high-frequency applications

Disadvantages: - Limited peak surge current handling capability - Sensitive to reverse voltage spikes

Working Principles

The SS12P2LHM3_A/I operates based on the principle of semiconductor junction rectification. When a positive voltage is applied to the anode with respect to the cathode, it allows current to flow, effectively converting AC to DC.

Detailed Application Field Plans

This rectifier diode is commonly used in: - Power supplies - LED lighting - Battery chargers - Switching power supplies - Automotive electronics

Detailed and Complete Alternative Models

  • 1N4148: General-purpose diode with similar characteristics
  • 1N5819: Schottky diode with lower forward voltage drop
  • HER108: Ultrafast recovery diode with higher surge current rating

Note: The above alternatives may have different package sizes and pin configurations.

This comprehensive entry provides detailed information about the SS12P2LHM3_A/I rectifier diode, including its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

기술 솔루션에 SS12P2LHM3_A/I 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is SS12P2LHM3_A/I?

    • SS12P2LHM3_A/I is a specific model of semiconductor diode used in various technical solutions.

  2. What are the key specifications of SS12P2LHM3_A/I?

    • The SS12P2LHM3_A/I diode typically has a forward voltage of around 0.7V, a reverse voltage of 20V, and a forward current of 1A.

  3. In what applications is SS12P2LHM3_A/I commonly used?

    • SS12P2LHM3_A/I is often used in power supplies, voltage regulators, and other electronic circuits where low forward voltage drop and high efficiency are required.

  4. What are the advantages of using SS12P2LHM3_A/I in technical solutions?

    • The SS12P2LHM3_A/I diode offers low power loss, high efficiency, and fast switching capabilities, making it suitable for various power management applications.

  5. Are there any limitations or considerations when using SS12P2LHM3_A/I?

    • It's important to consider the maximum forward current, reverse voltage, and temperature ratings to ensure proper operation and reliability.

  6. Can SS12P2LHM3_A/I be used in high-frequency applications?

    • Yes, SS12P2LHM3_A/I is suitable for high-frequency applications due to its fast switching characteristics.

  7. How does SS12P2LHM3_A/I compare to other diode models in terms of performance?

    • SS12P2LHM3_A/I offers competitive performance in terms of efficiency, forward voltage drop, and switching speed compared to other diode models.

  8. What are the typical operating conditions for SS12P2LHM3_A/I?

    • The typical operating temperature range for SS12P2LHM3_A/I is -55°C to +125°C, and it can handle moderate levels of current and voltage.

  9. Are there any recommended circuit designs or layouts for integrating SS12P2LHM3_A/I?

    • It's advisable to follow the manufacturer's datasheet recommendations for circuit layout and design to optimize the performance and reliability of SS12P2LHM3_A/I.

  10. Where can I purchase SS12P2LHM3_A/I diodes for my technical solutions?

    • SS12P2LHM3_A/I diodes are available from various electronic component distributors and manufacturers. It's important to source them from reliable suppliers to ensure authenticity and quality.