Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SS26SHE3_A/H
자세히보기 데이터시트

SS26SHE3_A/H Product Overview

Introduction

SS26SHE3_A/H is a semiconductor product belonging to the category of Schottky diodes. This product is widely used in various electronic applications due to its unique characteristics and advantages.

Basic Information Overview

  • Category: Semiconductor, Schottky diode
  • Use: Rectification, voltage clamping, power supply protection
  • Characteristics: Low forward voltage drop, fast switching speed, high temperature operation
  • Package: SOD-123
  • Essence: High efficiency, low power loss
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage Drop: 0.3V at 1A
  • Reverse Voltage: 60V
  • Maximum Continuous Current: 2A
  • Operating Temperature Range: -65°C to 125°C

Detailed Pin Configuration

The SS26SHE3_A/H has a standard SOD-123 package with two pins. The anode is connected to pin 1, and the cathode is connected to pin 2.

Functional Features

  • Fast Switching: Enables rapid response in electronic circuits.
  • Low Forward Voltage Drop: Reduces power loss and enhances energy efficiency.
  • High Temperature Operation: Suitable for demanding environmental conditions.

Advantages and Disadvantages

Advantages

  • Efficient power conversion
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitive to overvoltage conditions

Working Principles

The SS26SHE3_A/H Schottky diode operates based on the metal-semiconductor junction principle. When a forward voltage is applied, it allows current to flow with minimal voltage drop. In reverse bias, it exhibits low leakage current.

Detailed Application Field Plans

This Schottky diode finds extensive use in: - Power supply units - Voltage clamping circuits - Battery charging systems - Solar panel bypass diodes

Detailed and Complete Alternative Models

  • SS24E3/61T - Similar specifications with lower forward voltage drop
  • SS34HE3/52T - Higher reverse voltage rating with comparable characteristics
  • SS56HE3/9AT - Higher current handling capacity with similar package type

In conclusion, the SS26SHE3_A/H Schottky diode offers efficient power conversion, fast switching, and compact design, making it suitable for various electronic applications.

Word count: 305

기술 솔루션에 SS26SHE3_A/H 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is SS26SHE3_A/H?

    • SS26SHE3_A/H is a Schottky diode rectifier with a forward voltage drop of 0.37V at 2A.

  2. What are the typical applications of SS26SHE3_A/H?

    • It is commonly used in power supplies, converters, and freewheeling diodes for consumer, automotive, and industrial applications.

  3. What is the maximum repetitive reverse voltage of SS26SHE3_A/H?

    • The maximum repetitive reverse voltage is 60V.

  4. What is the maximum average forward current of SS26SHE3_A/H?

    • The maximum average forward current is 2A.

  5. What is the operating junction temperature range of SS26SHE3_A/H?

    • The operating junction temperature range is -65°C to +125°C.

  6. Does SS26SHE3_A/H have a low leakage current?

    • Yes, it has a low leakage current of 0.5µA at 60V.

  7. Can SS26SHE3_A/H be used in high-frequency applications?

    • Yes, it is suitable for high-frequency applications up to 100MHz.

  8. Is SS26SHE3_A/H RoHS compliant?

    • Yes, it is RoHS compliant.

  9. What is the package type of SS26SHE3_A/H?

    • It comes in a DO-214AC (SMA) package.

  10. Are there any recommended layout considerations when using SS26SHE3_A/H?

    • It is recommended to minimize the length and area of PCB traces to reduce parasitic inductance and resistance. Keep input and output traces short and direct.